HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
| Payment Terms | T/T, L/C |
| Supply Ability | 10 set per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| Product name | Conductor Damage Degree Test Apparatus |
| Control | Manual control, button operation |
| Test times | 0-9999 |
| mass | 0.3, 0.4, 0.7, 0.9, 1.4, 2.0kg |
| Test rate | 10 ± 2 r/min |
| Diameter of Platen | 75mm |
| Diameter of bushing hole | 6.5, 9.5, 13, 14.5mm |
| Test height | 260, 280, 300, 320mm |
| Brand Name | HeJin |
| Model Number | HC9933 |
| Certification | Third party calibration certificate/ CE(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60884-1 Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable
IEC60245-1 Electric Static Flexibility Test Apparatus For Cable
Servo Motor IEC Performance Tester For Proximity Switches
1000mm Measuring Universal Conductor Resistance Fixture
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 10 set per month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| Product name | Conductor Damage Degree Test Apparatus | Control | Manual control, button operation |
| Test times | 0-9999 | mass | 0.3, 0.4, 0.7, 0.9, 1.4, 2.0kg |
| Test rate | 10 ± 2 r/min | Diameter of Platen | 75mm |
| Diameter of bushing hole | 6.5, 9.5, 13, 14.5mm | Test height | 260, 280, 300, 320mm |
| Brand Name | HeJin | Model Number | HC9933 |
| Certification | Third party calibration certificate/ CE(cost additional) | Place of Origin | China |
| High Light | IEC 60069-1 IEC Test Equipment ，Button Operation IEC Test Equipment ，75mm Conductor Damage Degree Test Apparatus | ||
Conductor Damage Degree Test Apparatus IEC 60069-1 Test Equipment Rate 10 ± 2 r/min
Standard:
IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 12.2.5, figure 11
IEC 60669-1 ‘Switches for household and similar fixed electrical installations – Part 1: General requirements’ clause 12.2.5, figure 9
Standard description:
Terminals with screw clamping shall be so designed and constructed that they clamp the conductor(s) without undue damage to the conductor(s).
The terminal is placed in the test apparatus according to figure 11 and fitted with rigid, solid, stranded and/or flexible conductor(s), according to table 3 first with the smallest and then with the largest nominal cross-sectional area, the clamping screw(s) or nut(s) being tightened with the torque according to table 6.
Where rigid stranded conductors do not exist, the test may be made with rigid solid conductors only. In this case, there is no need for further tests.
The length of the test conductor shall be 75 mm longer than the height (H) specified in table 9.
The end of the conductor is passed through an appropriate bushing in a plate positioned at a height (H) below the equipment, as given in table 9. The bushing is positioned in a horizontal plane such that its centre line describes a circle of 75 mm diameter, concentric with the centre of the clamping unit in the horizontal plane; the platen is then rotated at a rate of (10 ± 2) r/min.
The distance between the mouth of the clamping unit and the upper surface of the bushing shall be within ±15 mm of the height specified in table 9. The bushing may be lubricated to prevent binding, twisting, or rotation of the insulated conductor.
A mass as specified in table 9 is suspended from the end of the conductor. The duration of the test is approximately 15 min.
During the test, the conductor shall neither slip out of the clamping unit nor break near the clamping unit, nor shall the conductor be damaged in such a way as to render it unfit for further use. IEC Test Equipment
The test shall be repeated with rigid solid conductors where they exist, if the first test has been made with rigid stranded conductors.
Parameter:
| Model | HC9903 |
| Test rate | 10±2 RPM |
| Diameter of gyration | 75mm |
| Test times | 0-9999 |
| Weights | 0.3, 0.4, 0.7, 0.9, 1.4, 2.0kg |
| Test height | 260, 280, 300, 320mm |
| Diameter of bushing hole | 6.5, 9.5, 13, 14.5mm |
| Standards | IEC60884-1, IEC60669-1 IEC Test Equipment |
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
3000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr... Guangzhou Hejin Automation Control Technology Co., Ltd. is a modern enterprise specialized in R & D, manufacturing and sales of technology intensive industrial equipment. Its main products include laboratory testing equipment and production line detection system, which are widely applied to refr...
Get in touch with us
Leave a Message, we will call you back quickly!