Xiamen Sincery Im.& Ex. Co., Ltd.
| Payment Terms | T/T |
| Delivery Time | 1-12 weeks |
| Packaging Details | Original packing |
| Rated measuring current IPN | 300A |
| Measuring range IP (@VC=±15V) | 0～±500A |
| Power supply voltage VC | ±12V~±15V×(1±5%) |
| Turn ratio K | 1:2000 |
| Rated measurement output ISN | 150mA |
| Load resistance RL | 85°C |
| Basic error δi (@Ta=+25℃, Ip=IPN) | ≤±0.5% |
| Linearity error δL (@Ta=+25℃, Ip=IPN) | ≤0.2% |
View Detail Information
Explore similar products
Low Zero Error 500A Current Monitoring Sensor For Battery
30kHz 1200A AC DC Pulse Current Measurement Sensor
4.75V 800A Current Transducers Response Time 2us
4.75V 5V 5.25V 1200A AC Current Sensor for accurate measurement
Product Specification
| Payment Terms | T/T | Delivery Time | 1-12 weeks |
| Packaging Details | Original packing | Rated measuring current IPN | 300A |
| Measuring range IP (@VC=±15V) | 0～±500A | Power supply voltage VC | ±12V~±15V×(1±5%) |
| Turn ratio K | 1:2000 | Rated measurement output ISN | 150mA |
| Load resistance RL | 85°C | Basic error δi (@Ta=+25℃, Ip=IPN) | ≤±0.5% |
| Linearity error δL (@Ta=+25℃, Ip=IPN) | ≤0.2% | ||
| High Light | Closed Loop Hall Effect Current Transducer ，300A Hall Effect Current Transducer | ||
product manual
The NACL.300B3-S5/SP2 series high-precision closed-loop Hall current sensor is insulated between the primary and secondary, and has super anti-interference ability; it is used to measure DC, AC and pulsating current.
| product advantages | Product application field | Reference standard |
| High precision | Frequency conversion speed regulation system | UL 94-V0 |
| Small temperature coefficient | Communication power | EN 60947-1: 2004 |
| small volume | Uninterruptible power supply UPS | EN 50178: 1998 |
| Main electrical parameters (At Ta=+25℃) | ||
| Rated measuring current IPN | 300A | |
| Measuring range IP (@VC=±15V) | 0～±500A | |
| Power supply voltage VC | ±12V~±15V×(1±5%) | |
| Turn ratio K | 1:2000 | |
| Rated measurement output ISN | 150mA | |
| Load resistance RL | 70℃ | 85°C |
| (@±12V, ±300A) | 0Ω ～ 37Ω | 0Ω ～ 35Ω |
| (@±12V, ±500A) | 0Ω ～ 10Ω | 0Ω ～ 8Ω |
| (@±15V, ±300A) | 0Ω ～ 56Ω | 0Ω ～ 54Ω |
| (@±15V, ±500A) | 0Ω ～ 21Ω | 0Ω ～ 19Ω |
| Secondary side current consumption IC | ≤25mA +output measuring current ISN | |
Procurement information
1. Products can be customized according to your needs. You are welcome to provide physical samples or detailed process drawings to design, produce and process. 2. If there is no special requirement, our company will assign logistics distribution and deliver the goods to customer factory
3. Payment method: delivery after payment, which can be negotiated according to the specific order quantity.
4. The response time of the number of customers should not exceed 8 working hours.
5. Emergency on-site service time shall not exceed 24 hours.
6. Provide emergency support for customer's urgent shortage of spare parts.
| Accuracy-dynamic parameters | |
| Basic error δi (@Ta=+25℃, Ip=IPN) | ≤±0.5% |
| Linearity error δL (@Ta=+25℃, Ip=IPN) | ≤0.2% |
| Zero output error δZ (Ta=+25℃) | ≤ ± 0.2mA |
| Zero temperature drift δZt (Ta=-40℃～+85℃) | ≤ ± 0.7mA |
| Response time tr (@di/dt=100A/us ,90% IPN) | ≤1us |
| Bandwidth BW (-3dB) | DC～100 kHz |
| General data | |
| Working temperature Ta | -40℃~+85℃ |
| Storage temperature Ts | -45℃~+90℃ |
| Weight m | ≤110g |
| Insulation parameters | |
| Insulation voltage Ud (@50Hz,1min) | 3 KV |
| Insulation resistance RIS (@2500V) | ≥500 MΩ |
NACL.300B3-S5/SP2 current sensor outline drawing
| Mechanical characteristics |
| 1. Equipment fixing method 1: 4 M4 stainless steel bolts are assembled and fixed through 4 Φ4.3mm mounting holes on the end face, and the torque requirement is 3.2Nm; 2. Equipment fixing method 2: 2 M4 stainless steel bolts are assembled and fixed through 2 Φ4.3mm mounting holes on the bottom surface, and the torque requirement is 3.2Nm; 3. Equipment fixing method 3: 4 ST2.2 self-tapping screws are assembled and fixed through 4 through holes with a diameter of 1.9mm on the end face, and the torque is required to be 0.75Nm; 4. Equipment fixing method 4: 4 ST2.2 self-tapping screws are assembled and fixed through 4 holes on the bottom surface with a depth of 7.5mm and a diameter of Φ1.9mm. The torque requirement is 0.7Nm. 5. Secondary electrical connection: molex 6410 |
Company Details
Business Type:
Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2018
Total Annual:
10,000,000-60,000,000
Employee Number:
100~120
Ecer Certification：
Site Member
Xiamen Sincery Import & Export Co., Ltd. is engaging in studying and innovating the total solution of electronics. Its main management concludes connectors and special technical service. Sincery has brought in the worldwide leading brands and applied technology. And combined with modern... Xiamen Sincery Import & Export Co., Ltd. is engaging in studying and innovating the total solution of electronics. Its main management concludes connectors and special technical service. Sincery has brought in the worldwide leading brands and applied technology. And combined with modern...
Get in touch with us
Leave a Message, we will call you back quickly!