MOORE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 10 pieces a day |
| Delivery Time | today |
| Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 |
| Control System | FANUC |
| Application | Nuclear Power Plant |
| lead time | in stock |
| description | MMC-SD-1.0-230-DN G&L MMCSD1.0-230DN |
| Weight | 4lbs |
| Brand Name | FRS200B |
| Model Number | G&L MOTION CONTROL |
| Certification | CO.CQ |
| Place of Origin | USA |
View Detail Information
Explore similar products
Automobile SST-DN4-104-2 Automation DCS BRAD HARRISON WOODHEAD
IRDH265-4 BENDER A-ISOMETER Insulation Monitoring Device For IT AC Systems
ARISTA ARP-2610A Fanless Industrial HMI Panel Computer VIA 667 GHz
5PP320.1043-39 5PP320.104339 B&R Power Panel PP320
Product Specification
| Payment Terms | T/T | Supply Ability | 10 pieces a day |
| Delivery Time | today | Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 | Control System | FANUC |
| Application | Nuclear Power Plant | lead time | in stock |
| description | MMC-SD-1.0-230-DN G&L MMCSD1.0-230DN | Weight | 4lbs |
| Brand Name | FRS200B | Model Number | G&L MOTION CONTROL |
| Certification | CO.CQ | Place of Origin | USA |
| High Light | dcs automation ， dcs modules | ||
G&L MOTION CONTROL MMC-SD-1.0-230-DN G&L MMCSD1.0-230DN
Product Description:
ULTRA 100 and 200 drives are feature-rich, high-performance drives that offer the flexibility to handle a wide range of applications. You can set up the ULTRA 100/200 drives as indexing drives, velocity servo drives, stepper drives, or master encoder followers. With the DeviceNet option, you can remotely commission and reprogram ULTRA 100 drives. In addition, you can use the ULTRA 100/200
drives host command protocol to set up multiple drives. Available in seven power ranges, theULT RA100/200 drives can be mated to four high-performance brushless servo motor lines. Ultra Master software, a Windows-based interface, provides you with a familiar programming environment and a powerful commissioning tool for all ULTRA 100/200 drives.ULTRA 200 positioning drives deliver full-featured flexibility and impressive power and performance. Each ULTRA 200 drive provides:115 to 230V AC single phase input (single phase or three phase for the 75 amp version, three phase only for the 150 amp version) Phase-to-phase and phase-to-ground short circuit protection An internal resistive shunt A built-in auxiliary AC input (to power logic only) Built-in power supplies (including 24V I/O supply)—no external sourcerequired (except AC line) The ability to drive sinusoidal AC brushless motors An DC bus available externally for power leveling or for use of shared power supplies
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Related Product Recommendation:
| 3A99158G01 | DV47L250LE4A P326M-250LE4A | MA-0186-100 |
| 3A99220G01 | MSD013A1Y | LE4-116-XD1 |
| 3A99266G01 | MSD5AZA1Y | PS416-INP-401 |
| 5X00059G01 | PANADAC-332A P332AZ1.5KW | APP-PFB-PCIE PCIE1500PFB 112011-5026 |
| 5X00070G04 | Jan-03 | 777978-VM |
| 5X00106G01 | BLX150F-FICO-4 | MP3-404HR2 |
| 5X00109G02 | BLX150F-FICO-5 | FRN1420A |
| 5X00119G01 | C3S075V4F10 I20 T40 M11 | MVME162-220 |
| 5X00121G01 | COMPAX-S CPX8541S/F4 | MVME2304 64-W5206C01B |
| 5X00167G01 | CPX2500S | MVC4-TCB |
| 5X00226G02 | CPX2500S COMPAX-S | B-SAIMP-XROHS |
| 5X00241G02 BOSSGOO | HSSI-ED2 | MCS20-230/24 |
| 5X00270G01 | POP12 | MYCOM IMS500-120AL |
| 5X00300G01 | MTAP2 PCB-00322-REVD | CMX45 |
| 5X00419G01 | C-5 VER.3 | A702699T NDR096RTP871 X0417 PCB |
| 5X00419G02 | COM5V2 | X0420 B 105A 87-3 NDR096RTP865 PCB |
| IC31224G01 | KNS 51.14-2D | Y6XC24 NDR064RTP869 PCB |
| PCU1000 | D-35614 | Y6ZA08 R8520 NDR064RTP86Z |
| SST-DN3-PCI-2 | D-35614 PKR 251 | Y72A03 R8520 NDR064RTP872 |
| SST-DN3-PCI-2 DN3-PCI-1-E | 4535 670 73831 4535 670 06391 | DPM-GS-2GW-S |
| SST-DN3-PCU-1-E | 9.40622E+11 | A413125 AIU8 |
| SST-DN3-PCU-2-E SST-DN3-PCI-2 | IBS RT 24 DIO 16/16-T | A413135 AOU4 |
| SST-DN4-102-2 | IBS RT 24DI /16-T | A413160 FIU1 |
| 1C31233G04 | IBSS5DSC/I-T 2752000 | A413280 CPR1 |
| 1C31234G01 | RFC 430 ETH-IB 2730190 | A413285 BIR82 |
| 1C31238H01 | OCX-CTN-13-R-D-ST-ACV | A413294 BOR86 |
| 1P00028G01 | OCX-CTN-85-R-D-ST-24V | A413295 AIR8C |
When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e.
“Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00
Applied Materials AMAT 5200 HDP-CVD Ultima 0100-18025 Chamber Interface Board
AMAT Applied Materials HP Upgrade Arm Leveling Calibration Tool 0270-76328 New
Trebor 610 Magnum Pump Used
Lam Research 799-130053-004 Parallel Communications Interface New
Lam Research J Communications Box 853-494279R-001-A-PCBELE 853-494279 New
AMAT Applied Materials 0040-09957 0040-09961 0020-32963 ESC Chuck Used
LAM Research 853-012500R002-E Edge Sensor Assembly
Unipower Unimod EHPA-2C3A5D5H Power Supply PN 712-1427-000
Tescom 74-2461KRN20 Pressure Regulator Valves Lot of 3 New
IL Young FA TX-350 Actuator Valve TX350-2DA-NW40-SV-LS2-3W(T)
Eaton 330002 Tungsten Dual Filament New
LAM 853-025903R-001-3 Lo-FAT Sled RF Tuner LOFAT
LAM 853-025903R-001-3-ELMPN Lo-FAT Sled RF Tuner LOFAT
DNS Track SK2000 V1 Robot Wafer Arm Assembly Used
AMAT DNS Track K2000-V1 Robot Wafer End Arm Assembly Lot of 3
Lam Research 810-057016-003 PCB Assembly PLTN HTR PWR Board
Lam Research 716-330004-008 Hi-Condition Focus Ring 8" inch Clean
Lam Research 716-072165-005 Ring Apert 185mm 8-1.5mm Jets Cleaned
SMC US22829 16-Port Pneumatic Manifold AMAT 4060-00374 Used Working
SMC VV5Q11-14-DAK00811 14-Port Pneumatic Manifold AMAT 4060-00678 Used
SMC VV5Q11-14-DAK00810 14-Port Pneumatic Manifold AMAT 4060-00680 Used Working
Novellus 951479 Cable, motor power
Novellus 951337 Cable, motor power
2 PUV0047-5 power supply HOYA-SCHOTT, UV light source,
3 Banner D12SN6FP Fiber Optic sensor switch
Chemraz 9312-SC520, 2-312, Compound 520, 0.600 x 0.210 inch
Bearing, WFR Roller, MESA 2B-10-241, Used, Lot of 4
Nozzle FLT 80787-50 95Deg@500psi, Lot of two, New
7 RF Low freq silver plated connector AMP, 330830 = 5, 330830-8=2
SMC MDSUB7-90S-R73L Rotary Pneumatic Actuator AMAT 0520-00271 Lot of 2 New
SMC MY2HT16G-538-DCM1864M Rodless Cylinder Slide 3760-00353 new
SMC Manual Valve INA-24-63-04RD lot of 10 working
Hitachi S3-89146 SMC Air Cylinder CM2XL20-70 Qty 3 New
SMC IN587-07-A Gas Panel Communication Box 32-Port Manifold V114-5FZ-X6 Used
SMC REA32-Z2727-365 Pneumatic Sine Rodless Cylinder Lot of 3 Used
SMC In-Line Flow Bypass Valve VXD2150-06-1-X696 0190-34864 New
SMC 0190-18443 HE Thermal Fuse For Cold Loop New
SMC Digital Pressure Switch ISE5B-T2-26L ISE6B-A2-26L Lot of 8 Used Working
SMC NCDQ2B50-UIA980-090 Pneumatic Cylinder Lot of 3 Used Working
SMC KDM10-DUM02264 KDM One Touch Multiconnector AMAT 3300-13055 Lot of 8 New
SMC NCDQ2WB63-G0922-80 Pneumatic Cylinder Assembly Used Working
SMC 0010-26749 Gate Valve Actuator 300mm Rev. 002 Copper Exposed Used Working
BES-9239-33A SMC LPM Flow Switch Manual Valve AMAT 0910-28878 New
SMC NCDQ2B80-G0656-38 Pneumatic Cylinder Lot of 4 Used Working
SMC Thermo-Con High Lift Type Module INR-244-220A working
SMC 11GPM RAD 300 Flow Switch Assembly PF2W511-N10-1 New 0190-27970
SMC CDQ2B140C-J0406-XC Air Cylinder Hitachi 3-839273-^A New
SMC US447 24 Port Manifold Valve AMAT 0190-02046 Used Working
SMC SS0750-06-DAO00978 6-Port Pneumatic Manifold AMAT 4060-00846 New
SMC NCDQ2B50-UIA980090 Pneumatic Cylinder 3020-00317 lot of 4 working
The use of the product:
1.Power industry,
2.the elevator industry,
3.Experienced technichal support team.
2.Avoid unplanned downtime
3.textile printing and dyeing,
Our advantages:
1.open architecture to take advantage of traditional or renewable sources of energy!
2.Avoid unplanned downtime
3.365 days warranty for all the goods from us.
Frequently Asked Questions:
1.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
2.We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3.Q:How long warranty does Moore can provide ?
A: Moore can provide 1 year warranty !
Send your Inquiry details in the Below, Click "Send" Now!
Company Details
Business Type:
Agent,Trading Company
Year Established:
2011
Total Annual:
<200000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod... Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod...
Get in touch with us
Leave a Message, we will call you back quickly!