ABB Module NTRO02-A NTRO02 ABB NTRO02 A NTRO02 Road Car New Sealed

Product Specification

ABB Module NTRO02-A NTRO02 ABB NTRO02 A NTRO02 Road Car New Sealed

Product Description:

IResolution in the PLC system: The measured values are converted with a resolution of
12 bits, i.e. 11 bits plus sign for voltage and 12 bits without sign for current. The ranges 0...5 V und ±5 V are converted with 10 bits plus sign.the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to Further details can be found in volume 2, chapter 5.1 "General
information for the use of analog inputs and outputs". In order to make sure, that unused input channels have a defined 0V level, they may be shorted to AGND. Unused inputs must be configured with "unused".
The relationship between the analog input signals and the converted numbers is illustrated in the following figures. be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

Related Product Recommendation:

Product's Character:

Features of the digital inputs/outputs:The 8 digital inputs/outputs are arranged in one group.
The group as a whole is electrically isolated from the rest of the device. The inputs/outputs can be used individually as input, output or re-readable output.  If the terminals are used as digital inputs, the input
signal delay can be configured to 7 ms (default) or to 1 ms. The configuration is performed by setting certain bits in the system constant KW 85,01 as follows: If the terminals are used as digital outputs, the output signals "1" are individually monitored by the re-readable input. If the output status is wrong, anoverall error message is generated for the involved output group. The error is displayed by the red LED Ovl. and by error flags of the PLC then. The error could have been caused by overload, shortcircuit
or missing supply voltage UP5/ZP5.

PW 01 P3761158018181, 8018181M DPW01 Power Supply ABB
DPW 02 Power Supply - 24 Vdc Input ABB
DPW03 P37611-5-8018644, 8018544M DPW 03 Power Supply Module ABB
DRA 02 37411-4-0369673 DRA 02 Card Rack ABB
DRA 03 0369674M DRA 03 Freelance Rack, 3 Slot ABB
DRA 04 0369675M DRA 04 Freelance Rack, 5 Slot ABB
DSAI 133 57120001-PS Analog Input Board 32 Channels ABB
DSAI 133N 3BSE018526R1 Analog Input Module ABB
DSAI110 57120001-DP DSAI 110 Analog Input Module ABB

DSAI130 57120001-P DSAI 130 Analog Input Module ABB
DSAI130A 3BSE018292R1 DSAI 130A Analog Input Module ABB
DSAI145 5712001-HA RTD Input Module ABB
DSAI146 3BSE007949R1 RTD Input Module ABB
DSAI155 57120001-HZ Thermocouple Module ABB
DSAI155A 3BSE014162R1 Thermocouple Module ABB
DSAI303 57120001-CL Analog Input Board ABB
DSAI305 57120001-BX/3 Analog Input Board ABB
DSAO 110 57120001-AT Analog Output Module ABB
DSAO 130 57120001-FG DSAO130 Analog Output Board 16 Channels ABB
DSAO120 57120001-EY DSAO 120 Analog Output Module 8 Channels ABB
DSAO120A 3BSE018293R1 Analog Output Board ABB
DSAO301 57120001-DZ/4 Analog Output Board ABB
DSAV110 57350001-E Driver Module Video ABB
DSAV111 57350001-CN DSAV 111 Video Generator Module ABB
DSAX110 57120001-PC/5, 57120001-PC/6 DSAX 110 Analog Input/Output Module ABB

The use of the product: