KOLLMORGEN | SERVOSTAR 614 3X230-480V 10KVA 14A | Servo Drive Amplifier

Product Specification

SERVOSTAR 614 3X230-480V 10KVA 14A KOLLMORGEN Servo Drive Amplifier

Product Details

Technical description

The SERVOSTAR 600 family of digital servo amplifiers

Standard version:

 6 current ratings (1.5 A -Europe only-, 3 A , 6 A , 10 A , 14 A, 20 A)

 3 instrument widths : 70 mm for 1.5A up to 10A rated current,100 mm for 14A rated current,120 mm for 20A rated current

Wide range of rated voltage (3x208V –10% to 3x480V +10%)

Overvoltage category III acc. to EN 61800-5-1

Shield connection directly at the servo amplifier

2 analog setpoint inputs

Integrated CANopen (default 500 kBaud), for integration into CAN bus systems and for setting parameters for several amplifiers via the PC-interface of one amplifier

Integrated RS232, electrically isolated, integrated pulse-direction interface

Synchronous servomotors, linear motors and asynchronous motors can be used

Electrical supply

Directly off grounded 3 phase system: 230V-10% ... 480V+10%, 50 Hz, 208V-10% ... 480V+10%, 60 Hz

TN-system or TT-system with grounded neutral point, max. 42,000 rms symmetrical amperes.

Connection to other mains supply networks only with insulating transformer p.48

B6 rectifier bridge, directly off 3-phase earthed (grounded) supply system, integral power input filter and inrush circuit

Single-phase supply (e.g. for setup) is possible

Fusing: (e.g. fusible cutout) provided by the user

Shielding: All shielding connections directly on the amplifier

Output stage: IGBT- module with isolated current measurement

Brake circuit: with dynamic distribution of the brake power between several,amplifiers on the same DC bus link circuit. Internal brake resistor,as standard, external brake resistors if required

DC bus link voltage 260 — 900 VDC, can be switched in parallel

Interference suppression filter for the supply input (to category 3) is integrated

Interference suppression filter for the 24V aux. supply (to category 3) is integrated

Auxiliary supply voltage 24VDC

Electrically isolated, internal fusing (3.15 AT), from an external 24VDC psu, e.g. with insulating transformer

Operation and parameter setting

With our user-friendly software for setup through the serial interface of a PC

Direct operation by means of two keys on the servo amplifier and a 3-character LED display for status display in case there is no PC available

Fully programmable via RS232 interface

KOLLMORGEN News

On track with autonomous 2Gen KOLLMORGEN expands its new generation of motors to cover the low voltage range

Following the successful launch of the second generation AKM2G servo motors, KOLLMORGEN is now expanding its new range for applications in the low voltage range. The specialist in servo drive technology and Motion Control is responding to increased demand for AKM2G motors for AGVs, robotics, and medical technology. Powerful compact motors for supply voltages of 24, 48, 72 and 96 V DC are increasingly in demand here.

KOLLMORGEN is initially launching the AKM2G motors for low voltage applications in frame size 3. The company is relying on optical encoders, Hiperface DSL, EnDat as well as the tried-and-tested robust Resolver as feedback systems. In terms of connection technology, the options available currently include M23 connections in the SpeedTec version and hybrid Htec. Further options are due to follow as part of the market launch.

More Products 

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52