FMZ-S108 Automatic Film Laminator Machine BOPP Film Laminator Machine

BOPP,OPP

(1) The paper feeder ensures stable production during the lamination process, saves time and increases productivity. The equipment adopts Feida, four suctions and four feedings, and the two suction strokes take the orbital pneumatic paper feeding to ensure the smooth feeding of high-speed paper.

(2) Over-limit protection for the rise and fall of the platen.

(3) Pre-stacking mechanism to realize non-stop paper feeding.

(1) The powder removal system adopts double-channel electric heating roller hot pressing.

(2) Electric heating powder remover and refined scraper are used to ensure the removal of paper scraps and dust to the greatest extent; dust cleaning directly falls into the powder chute, which is convenient and easy to handle.

(1) The gluing part mainly ensures the uniformity of gluing. The gluing hard chrome roller is generally controlled to be less than 0.002mm. 

(2) The drying part adopts large diameter (Φ800mm) heating roller, which adopts intelligent electromagnetic heating device and built-in oil heating system to save electricity. At the same time, ensure that the film will not be thermally deformed or broken;

(3) The hot pressing roller adopts intelligent electromagnetic heating device and built-in oil heating system, with a diameter of 370mm, which ensures that the surface temperature of the roller is more uniform and meets the requirements of high-speed lamination. The maximum total pressure reaches 10T to ensure the quality requirements of high-speed lamination.

(4) The intelligent electromagnetic heating device adopts imported core circuit and PLC automatic temperature control device, the heat loss during the energy transfer process is extremely small, and the heating efficiency is as high as 90% or more.

(5) The whole machine is controlled by PLC and man-machine, and each part is connected with frequency conversion and servo to ensure speed synchronization
It is easy to operate by one person (the main motor adopts variable frequency motor).

(6) Fitting pressure system, automatic hydraulic station adjustment, easy to operate

(7) Automatic magnetic powder control system for film roll tension;

(8) Waste film slitting device: The slitted waste film is wound with a force distance motor, and the winding motor can adjust the current to realize the winding tension.

(9) Equipped with a hanger with a rated load of 200kg, it is easy to hoist the roll film or roll paper (the maximum diameter of the roll film or roll paper is 200mm, and the maximum weight is 150kg).

The paper cutter can be equipped with a two-knife system, which are often equipped with: disc flying knife, sandpaper knife; for PET film, a chain knife can be added.

(1) The automatic laminating machine usually adopts a rotary knife cutting structure, which can ensure the effective breaking of the paper above 128g, but for the paper below 128g, the working speed should be appropriately slowed down.

(2) The adjustment-free conveying belt is suitable for conveying various sizes of thick and thin paper without deformation, making the operation faster and more convenient.

The programmable special module linkage system can automatically increase or decrease with the speed of the laminating machine.

(1) Pneumatic paper aligning mechanism is adopted to ensure neat delivery.

(2) A paper counter is provided.

(3) The electric eye induction automatically drops, and the paper output air pressure adjustment function.

(4) Automatically use deceleration paper delivery function at high speed.

(5) The intelligent automatic waste discharge system automatically discharges the uncut products to avoid scrapping due to paper jams.

(6) The upper/lower double-layer design is suitable for thin paper feeding operation (the spacing can be adjusted according to the thickness of the paper,

So that the thin paper can be accurately sent to the whole paper mechanism, suitable for high-speed production).