Arc Shaped Surface Wireless Conference Microphone Network DSP Conference

Product Specification

New Generation Full Digital Wi-Fi Wireless Conference System, Instantly Setup, leave more time for inspiring minds -CLEACON Digital

Conference system

VISSONIC CLEACON, make wireless come true

1.The major pain point on traditional meeting room is to connect all devices by cable, which is complex and wasting of time. VISSONIC Wireless conference system, start the meeting in anytime, anywhere,
increase the efficiency on planning.

2.Standard Wi-Fi technology to co-work perfectly with existing networks CLEACON wireless unit, choose the frequency point from dozens of available ones on our access point, working in zero interference with
all other networks in the area.

3.Elegant arc-shaped surface design
Arc-shaped glass operation area is dust/water-proof, and there is no
noise/damage risk compare with common physical buttons, anti-scratch
cover technology, it remains smooth glass surface even after thousands
times of touch


Item Model for Order:
VIS-DCP2000-W.................. Full digital network DSP conference processor

Functions

1.Compliance with IEC 60914, GBT 15381-94

2.With VIS-EXM extension main unit, it can expand to 5200 discussion units

3.Support "Hand-in-Hand-Loop-Network" connection and the system automatically assigned to each unit independently ID to avoid duplicate ID conflict

4.Both wired/wireless discussion units can connect to the controller, fast and easily to adding delegate of meetings

5.Wireless unit supports up to 8 microphones active simultaneously, anti-interference ability is stronger than ever

6.compliance with IEEE 802.11n standard Wi-Fi both for 2.4GHz and 5GHz

7.2 channel audio input, XLR or RCA type, for local input or remote video-conferencing input

8.MAX 8 channel audio output, XLR, RCA or Phoenix type, to connect language translation system or output to different zones

9.Adding the audio input box, this system can be used with condenser microphones or dynamic microphones
Build-in functions for intercom

10.TCP/IP connection between controller and PC

11.Controlling through RS232 to realize MIC ON/OFF, Priority, Volume adjustment.

12.RS485 or RS232 to send the PELCO/VISCA protocol to realize camera auto-tracking function.

13.Hot-swap for any system unit, and the controller has auto-recovery function

14.Wide range of voltage from 110V~220VAC

15.Without using PC software, our conference controller still owns following settings:

- Limit on the number of speaking persons: By Setting the number of active units at the same time(Number is 1/2/3/4/5/6/7/8 units)

- Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller,"VOICE" Unit activated by voice, "FIFO" First in First out,"PTT" Keep pressing button when speaking, "APPLY" To apply then to speak,"ALL" Free to speak for all people

- Voting function: Approve/Abstain/Object

- Chairman unit has priority to close all other units or mute them temporarily

- Chairman unit can answer the application for speaking from delegate

- Simultaneous language interpretation

With PC software to add more ways of voting:
- Approve/Object
- Approve/Abstain/Object
- Level:1/2/3/4/5
- Ranking:--/-/0/+/++

By using RFID card to identify, can realize voting with names.

Interfaces

Front panel USB recording interface
3.5mm headphone for monitoring
1x RCA audio input
1x XLR audio input
1x RCA audio output
1x XLR audio output
6x Phoenix interface audio output
2x RJ45 digital audio connection
2x RJ45 for chairman unit, delegate unit, unit translators and other connection
1x RJ45 for wireless AP or router
1x DP9 male interface for external control
1x DP9 female interface for camera
1x three-pin phoenix interface for camera control keyboard
1x RJ45 for computer connection or network switcher
1x grounding screw
1x 100 ~ 240V DC Power Interface