25 Ton Excavator Vibro Machine For Sheet Pile Hammer 2800rpm

Product Specification

25ton Excavator Mounted Sheet Pile Driver Supplier From China Yakai

Vibratory Hammer

A vibratory hammer, also known as Pile Sheet Hammer / Driver, is Mainly Used for Pushing in or Pulling out the Operation of Different Shape Pipes / Steel Sheet Plates, etc. It is made of three main sections, separately are the Vibro hammer, Vice Arm, and Extension Arm (optional). It would Quickly Push the Metal Sheet, Pipes, or Other Stuff into the Soil by Producing Vertical Power.

Excavator Vibro Hammer Working Principle

The vibrating pile driver uses its high-frequency vibration to vibrate the pile at high speed and transmits the vertical vibration generated by the machine to the pile, causing the soil structure around the pile to change due to vibration, and the strength is reduced, and the soil around the pile is liquefied. Thereby reducing the frictional resistance between the pile body and the ground, and then sinking it into the soil by vibratory piling and the weight of the pile body. 

Factory Produce Process:

Sheet Pile Vibro Hammer Specification:

* The Parameter above may change with the technology improvement, will not notice additionally, please understand.

YAKAI Pile Sheet Hammer Features

• High efficiency: construction speed is much faster than other pile driving machinery than a pneumatic hammer, diesel hammer efficiency is 40%-100% higher.
• Functions: hydraulic pile driver can build a thin-walled cutoff wall, deep compaction treatment, ground compaction treatment, and other special construction.
• Wide range: almost suitable for any harsh geological conditions under the construction, can easily penetrate the pebble layer, sand layer, and other soil.
• Environmental protection: small vibration, low noise, no pollution, high-frequency hydraulic pile driver, with noise reduction power box, in urban construction can fully meet the requirements of environmental protection.
• Built-in motor and gears can effectively avoid motor and gears getting collision and dirt getting into the motor.

Extension Boom

Pile Driver Extension Boom, Also Known as Vice Arm, is the Connection Boom between Pile Sheet Hammer and Excavator. We have two designs for Extension Boom. One is a Valve Located near to External Cover of the Excavator, Second Design is Improved, and the Control Center Built-in Extension Boom Would Make the Installation Easier.  The Following Picture is Valve's Built-in Vice Arm.

*If you have a demand for a longer extension boom, we could offer a customized Extension Arm at extra cost.

Vibro Hammer Clamp

We have various design clamps for different working conditions:

• Fixed Clamp: for Photovoltaic, for Cement, for Cement Cuboid; 
• Movable Clamp: Metal Steel, Cement Mixing Pile, Cement Round Pile, Cement Cuboid Pile; 

Vibratory Hammer Real Work shot

The vibratory pile method is more efficient than other methods. It is mainly suitable for all kinds of sheet piles, I-steel piles, cement square piles, cylinder piles, guardian piles, and so on.

Hydraulic pile driver can be used to build piles, holes, also can be used for high-speed railway construction; through pebble layer, sand layer, and another soil type

The hydraulic pile driver suit for municipal, bridge, cofferdam, building foundation, and other short pile engineering.

Excavator Pile Sheet Hammer Operation Process 
1. Hanging pile hammer
2. Check the surroundings and machine
3. Verticality the objects going to be pulled, then clamp it to move to the right position
4. Put down the pile driver and make it slowly push into the soil to a certain depth (if necessary, install the pile cap)
5. Check the pile position and axis
6. Move the pile driver to the next pile to continue the operation.