Payment Terms | T/T, Western Union,Paypal |
Supply Ability | 100,000,000 Pieces Per Month |
Delivery Time | 7-10 Days |
Packaging Details | Bulk |
Type | Cement Fixed Wirewound Resistor |
Core | High alumina ceramic |
Tempe Range | --55℃~+250℃ |
Rated Power | 1~40W |
Nominal resistance | E12/E24 Series |
Resistance tolerance | ±2%,±5%,±10% |
Nonflammable | UL-94V-0 |
Tempe Coeffi | ±350PPM/℃ |
Brand Name | Aolittel |
Model Number | CR-M |
View Detail Information
Explore similar products
0.25W 0.5W 0.6W 1W 2W 3W Fast Flameproof Fusible Metal Film Resistor 0.1OHM
Moisture Resistance 7mm Ceramic Plastic Encapsulated CdS Photoconductive Cell
4mm Dia CdS Photoconductive Photocell Photoresistor Light Sensor 540nm For
3mm LDR Light Dependent Resistor Photoresistor Light Sensor 5-200K With Ceramic
Product Specification
Payment Terms | T/T, Western Union,Paypal | Supply Ability | 100,000,000 Pieces Per Month |
Delivery Time | 7-10 Days | Packaging Details | Bulk |
Type | Cement Fixed Wirewound Resistor | Core | High alumina ceramic |
Tempe Range | --55℃~+250℃ | Rated Power | 1~40W |
Nominal resistance | E12/E24 Series | Resistance tolerance | ±2%,±5%,±10% |
Nonflammable | UL-94V-0 | Tempe Coeffi | ±350PPM/℃ |
Brand Name | Aolittel | Model Number | CR-M |
High Light | flame detector sensor , surface mount resettable fuse |
SQP SQM SQZ SQH MPR SQS Coaxial High Alumina Ceramic Cement Fixed Wirewound Resistor CR-L 20W 500RJ 63x13x13mm
Overview
Cement resistors are power resistors that are heat and flame resistant.
Cement resistors are made to handle a large amount of power flowing through it with it being undamaged by heat or flames. If you are designing a circuit where a lot of current is being passed through a resistor and with it needing to be resistant to high heat and flame, cement resistors is a good design choice.
Typical power ratings range from 1W to 20W or more.
Tolerances from the stated resistance value are around 5 percent.
Main Specification
Packing: Bulk packing
Product type: SQP type , SQM type, SQZ type, SQH type, MPR type
Tolerance: ±5%, ±10%,
Resistance Value Range: 0.1 OHM-150K OHM
Testing Standard: JISC 5202
Non-inductive type also available.
Wirewound rods, value cut rods or fibre glass rods to be used.
Part Numbering
CR-(?) 5W 10K J
Type : CR-L,CR-M,CR-YA,CR-YB,CR-YC,CR-YD,CR-YD1,CR-YE,CR-YG,CR-V
Rated Power :2W,3W,5W,7W,10W,15W,20W,30W,40W
Nominal resistance value :E-12 Series / E-24 Series
Resistance tolerance : K ±10% , J ±5% , G ±2%
Power Rating
Rated power is maximum power which can be continuously loaded at specified ambient temperature
70℃,as Table-1;however when the ambient temperature exceeds 70℃,rated power should be determined
from the derating curve of Fig.1.
Table-1
Rated power
| Maximum working voltage | Maximum overload voltage | Dielectric withstanding voltage | Max Intermittence Overload Voltage |
1W | 350V | 700V | 1000V | 1500V |
2W | 350V | 700V | 1000V | 1500V |
3W | 500V | 1000V | 1000V | 1500V |
5W | 750V | 1500V | 1000V | 1500V |
7W | 1000V | 1500V | 1000V | 1500V |
10W | 1000V | 1500V | 1000V | 1500V |
15W | 1000V | 15000V | 1000V | 1500V |
20W | 1000V | 1500V | 1000V | 1500V |
30W | 1000V | 1500V | 1000V | 1500V |
40W | 1000V | 1500V | 1000V | 1500V |
Construction
NO | Item | Material |
1 | Ceramic core | High alumina ceramic is used. |
2 | Resistor element | The resistor element shall consist of metal oxide film or Resistance wire (Exemple:CN49W Φ1.0mm) . |
3 | Terminal | Tinned iron cap. |
4 | Connection | The lead wire,which is plated with solder,shall be mounted to the caps by welding process. |
5 | Lead wire | Soldered or tinned annealed wire. |
6 | Silicon cement | Silicon resin is used. Accord with UL-94V-0 Nonflammable specification |
7 | Ceramic case | High thermal conductivity |
Dimension (unit:mm)
1) CR-L type Ceramic Cement Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | ||||
L | W | H | Φd±0.05 | Wire Wound | Metal Oxide Film | |
1W | 14±1.0 | 6.5±1.0 | 6.5±1.0 | 0.50 | 0.1Ω~22Ω | 25Ω~56KΩ |
2W | 18±1.0 | 7.0±1.0 | 7.0±1.0 | 0.50 | 0.1Ω~22Ω | 25Ω~56KΩ |
3W | 22±1.0 | 8.0±1.0 | 8.0±1.0 | 0.68 | 0.1Ω~47Ω | 50Ω~100KΩ |
5W | 22±1.0 | 9.5±1.0 | 9.5±1.0 | 0.68 | 0.1Ω~47Ω | 50Ω~100KΩ |
7W | 35±1.5 | 9.5±1.5 | 9.5±1.5 | 0.68 | 0.5Ω~330Ω | 450Ω~100KΩ |
10W | 48±1.5 | 9.5±1.5 | 9.5±1.5 | 0.68 | 0.5Ω~450Ω | 470Ω~100KΩ |
15W | 48±1.5 | 13±1.5 | 13±1.5 | 0.68 | 1Ω~500Ω | 510Ω~100KΩ |
20W | 63±1.5 | 13±1.5 | 13±1.5 | 0.68 | 1Ω~600Ω | 620Ω~100KΩ |
30W | 75±2.0 | 19±2.0 | 17±2.0 | 0.68 | 1Ω~600Ω | 620Ω~100KΩ |
40W | 89±2.0 | 19±2.0 | 19±2.0 | 0.68 | 1Ω~600Ω | 620Ω~100KΩ |
2)CR-M type Ceramic Cement Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | |||||
W±1.0 | S±1.0 | H±1.5 | Φd±0.05 | P±1.0 | Wire Wound | Metal Oxide Film | |
2W | 11.5 | 7.5 | 20.5 | 0.50 | 4.5 | 0.1Ω~47Ω | 50Ω~100KΩ |
3W | 12 | 8.5 | 25 | 0.68 | 4.5 | 0.1Ω~47Ω | 50Ω~100KΩ |
5W | 13 | 9.5 | 25 | 0.68 | 4.5 | 0.1Ω~47Ω | 50Ω~100KΩ |
7W | 13 | 9.5 | 38 | 0.68 | 4.5 | 0.5Ω~330Ω | 450Ω~100KΩ |
10W | 13 | 9.5 | 52 | 0.68 | 4.5 | 0.5Ω~450Ω | 470Ω~100KΩ |
10W | 16 | 11.5 | 36 | 0.68 | 4.5 | 0.5Ω~450Ω | 470Ω~100KΩ |
3) CR-YB type Ceramic Type Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | |||||||
L | P±1.5 | W1±1.2 | W2±0.2 | W3±0.2 | H1±1.2 | H2±0.2 | H3±1.5 | ||
15 | 48±1.5 | 32.5 | 12.5 | 10 | 2.7 | 12.5 | 15 | 36 | 1.0-820 |
20 | 63±2 | 44 | 12.5 | 10 | 2.7 | 12.5 | 15 | 36 | 1.0-1K |
4) CR-YD type Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | |||||||
L | P±1.5 | W±1.0 | W1±0.2 | W2±0.2 | H±0.2 | H1±0.2 | H2±1.5 | ||
3 | 24±1.0 | 12 | 9.5 | 7.5 | 1.6 | 9.5 | 25 | 39 | 0.5-150 |
5 | 27±1.0 | 15 | 9.5 | 7.5 | 1.6 | 9.5 | 25 | 39 | 0.5-220 |
7 | 35±1.5 | 22.5 | 9.5 | 7.5 | 1.6 | 9.5 | 25 | 39 | 1-470 |
10 | 48±1.5 | 34 | 9.5 | 7.5 | 1.6 | 9.5 | 25 | 39 | 1-680 |
15 | 48±1.5 | 32.5 | 12.5 | 10 | 3 | 12.5 | 30 | 47.5 | 1-820 |
20 | 63±2.0 | 44 | 12.5 | 10 | 3 | 12.5 | 30 | 47.5 | 1-1K |
5) CR-YA type Fixed Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | |||||||
L | P±1.5 | W1±1.0 | W2±0.2 | W3±0.2 | H1±0.2 | H2±0.2 | H3±0.2 | ||
3 | 24±1.0 | 12 | 9.5 | 5.3 | 0.9 | 9.5 | 10 | 25.5 | 0.5-150 |
5 | 27±1.0 | 15 | 9.5 | 5.3 | 0.9 | 9.5 | 10 | 25.5 | 0.5-220 |
7 | 35±1.5 | 22.5 | 9.5 | 5.3 | 0.9 | 9.5 | 10 | 25.5 | 1-470 |
10 | 48±1.5 | 34 | 9.5 | 5.3 | 0.9 | 9.5 | 10 | 25.5 | 1-680 |
6) CR-YC type Ceramic Type Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | |||||||
L | P±1.5 | W1±1.0 | W2±0.2 | W3±0.2 | H1±1 | H2±0.5 | H3±1.5 | ||
3 | 24±1.0 | 12 | 9.5 | 7.3 | 1.6 | 9.5 | 10 | 25 | 0.5-150 |
5 | 27±1.0 | 15 | 9.5 | 7.3 | 1.6 | 9.5 | 10 | 25 | 0.5-220 |
7 | 35±1.5 | 22.5 | 9.5 | 7.3 | 1.6 | 9.5 | 10 | 25 | 1-470 |
10 | 48±1.5 | 34 | 9.5 | 7.3 | 1.6 | 9.5 | 10 | 25 | 1-680 |
7) CR-YE type Cement Type Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | ||||||||
L | P±1.5 | W1±1.0 | W2±0.2 | W3±0.2 | H1±0.2 | H2±0.2 | H3±1.5 | H4±1.5 | ||
3 | 24±1.0 | 12 | 9.5 | 7.4 | 3 | 9.5 | 7.5 | 4.5 | 30.4 | 0.5-150 |
5 | 27±1.0 | 15 | 9.5 | 7.4 | 3 | 9.5 | 7.5 | 4.5 | 30.4 | 0.5-220 |
7 | 35±1.5 | 22.5 | 9.5 | 7.4 | 3 | 9.5 | 7.5 | 4.5 | 30.4 | 1-470 |
10 | 48±1.5 | 34 | 9.5 | 7.4 | 3 | 9.5 | 7.5 | 4.5 | 30.4 | 1-680 |
8) CR-YD1 type Cement Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | ||||||||
L | P±1.5 | W±1 | W2 | W3 | W1 | H1 | H2 | H3 | ||
15 | 48±1.5 | 22 | 12.5 | 10 | 1.5 | 5 | 12.5 | 30 | 47.5 | 10-820 |
20 | 63±2.0 | 44 | 12.5 | 10 | 1.5 | 5 | 12.5 | 30 | 47.5 | 1.0-1K |
9) CR-V type Fixed Wirewound Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | ||||||||
L1 | L2±0.2 | L3±0.2 | H1±0.2 | H2±0.2 | H3±1.0 | W1±1.0 | W2±0.2 | W3±0.5 | ||
5 | 31±1.0 | 5 | 4 | 1.5 | 11 | 9.5 | 9.5 | 1.5 | 11.5 | 0.5-220 |
7 | 49±1.5 | 10 | 4 | 1.5 | 11 | 9.5 | 9.5 | 1.5 | 11.5 | 1-470 |
10 | 62.5±2 | 10 | 4 | 1.5 | 11 | 9.5 | 9.5 | 1.5 | 11.5 | 1-680 |
15 | 63.5±2 | 10 | 4.5 | 2.5 | 14.5 | 13 | 13 | 2.5 | 15.5 | 1-820 |
20 | 75±2 | 10 | 4.5 | 2.5 | 17.5 | 13 | 13 | 2.5 | 15.5 | 1-1K |
10) CR-H type Ceramic Resistor
Watt | Dimensions(mm) | Resistance Range(Ω) | ||||||||||
L1 | L2±1.0 | W3±0.2 | P2 | P3 | t2 | h2 | W1 | W2 | H1 | H2 | ||
10 | 48±1.5 | 23 | 12 | 6 | 8 | 0.6 | 4 | 9.5±1.0 | 5 | 9.5±1.0 | 6±1.5 | 1-680 |
15 | 48±1.5 | 23 | 12 | 7 | 8 | 0.8 | 4 | 12.5±1.2 | 6 | 12.5±1.2 | 7.5±2.0 | 10-820 |
20 | 63±2.0 | 23 | 12 | 7 | 10 | 0.8 | 4 | 12.5±1.2 | 6 | 12.5±1.2 | 7.5±2.0 | 1-1K |
30 | 75±2.5 | 56 | 18 | 9 | 10 | 0.8 | 4.2 | 19±1.5 | 7.5 | 19±1.5 | 10±2.0 | 1-1K |
40 | 88±2.5 | 68 | 18 | 9 | 10 | 0.8 | 4.2 | 19±1.5 | 7.5 | 19±1.5 | 10±2.0 | 1-1K |
Journey Of The Manufacturing Process
Axial Leaded Type Resistors Department--Welding Division--Packing Division--SMD Resistors Department--Printing--Firing--Side Terminal
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2017
Total Annual:
3,750,000-5,000,000
Employee Number:
400~500
Ecer Certification:
Site Member
Aolittel Technology Co.,Ltd. , specilized in production of various fuse , fuse holder and associated Products with plant area 5,000 m2 located in Dongguan city , which is widely known as World's Factory . Our R&D consist of experienced engineers with rich ... Aolittel Technology Co.,Ltd. , specilized in production of various fuse , fuse holder and associated Products with plant area 5,000 m2 located in Dongguan city , which is widely known as World's Factory . Our R&D consist of experienced engineers with rich ...
Get in touch with us
Leave a Message, we will call you back quickly!