Troponin I Creatine Kinase-MB Myoglobin Cardiac Marker Test Kit 40 Tests/Kit

Product Specification

High Accuracy Troponin I Creatine Kinase-MB Myoglobin Test Kit 40 Tests/Kit

Test Products Description

The High Accuracy Troponin I Creatine Kinase-MB Myoglobin Test Kit is a rapid visual immunoassay for the qualitative presumptive detection of human Myoglobin, CK-MB and cardiac Troponin I in whole blood, serum or plasma. This kit is intended for use as an aid in the diagnosis of myocardial infarction (MI).

1. Rapid, Fast, Accurate and Easy to Use
2. CE&ISO Marked
3. Reasonable Price
4. Immediate Result

Test Procedure And Result Interpretation

Bring tests,specimens,buffer and/or controls to room temperature (15-30°C) before use.

1. Remove the test from its sealed pouch and use it as soon as possible. For best results, the assay should be performed within one hour.

2. Place the test device on a clean and level surface.

For Serum or Plasma specimens: Hold the dropper vertically and transfer 2 drops of serum or plasma (approximately 50 μL)to the specimen well (S) of the test device, then start the timer. See illustration below.

Hold the strip by the end,where the product name is printed. To avoid contamination, do not touch the strip membrane.

OR

Transfer 3 drops of whole blood specimen (approximately 75 μL) to the specimen well of the device with the provided disposable pipette,then add l drop of buffer and start the timer.

OR

Allow 3 hanging drops of fingerstick whole blood specimen to fall into the center of the specimen well(S) on the device, then add I drop of buffer and start the timer.

Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area.

As the test begins to work, color will migrate across the membrane.

3. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.

For Cassette Format:

1) Remove the test from its sealed pouch, and place it on a clean, level surface. Label the device with patient or control
identification.

2) For whole blood specimen: Using the provided disposable pipette, Allow 2 hanging drops of finger stick whole blood specimen to fall into the center of the specimen well (S) on the device, then add 1 drop of buffer and start the timer.
For serum /plasma specimen: transfer 3 drops of serum/plasma specimen (approximately75 μL) to the specimen well (S) of the device and start the timer.

3) Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.

NOTE:

1. The intensity of color in the test region(T)may vary depending on the concentration of analytes present in the specimen. Therefore, any shade of color in the test region should be considered positive. Note that this is a qualitative test only, and cannot determine the concentration of analytes in the specimen.

2. Insufficient specimen volume, incorrect operating procedure or expired tests are the most likely reasons for control band failure.

Q1: Are you a Manufacturer?
Yes, we are manufacturer based in Hangzhou, China with 165 workers, 8000 square meter non-dust workshop, advanced autonnate machines and professional R&D team ensure the high quality, speedy delivery and large production capacity.

Q2: Can we put our logoltext on the products or package?
Yes, we can do OEM or even ODM. All of our products can be customized.

Q3: Can you provide free samples?
Yes, free samples are provided. But you need to pay the freight.

Q4: How long is your delivery time?
Our delivery time is usually two to three weeks after receiving the deposit. For a container order quantity, the production time is four weeks. It depends on the specific situation.

Q5: What is the MOQ?
Small quantity like 1000pcs is available.

Q6: How to make the payment?
By T/T.