ANC International Co., Limited
| Payment Terms | T/T, Western Union |
| Supply Ability | 2000pcs/day |
| Delivery Time | 1-3 working days |
| Packaging Details | 10pcs/box or 1pc/box |
| Distance | 100m over Cat.5 UTP Cable |
| Connector | Copper RJ45 |
| Rate | 10/100/1000Mbps |
| Weight | 0.025kg |
| DDM | No |
| Temperature | 0°C to +70°C |
| Brand Name | ANC or customized |
| Model Number | 1.25G Copper SFP |
| Certification | RoHS, CE, FCC |
| Place of Origin | China |
View Detail Information
Explore similar products
25G DWDM SFP28 Fiber Optic Transceiver Ch21-Ch60 SMF 10KM Multi - Rate Supported
1310nm Wavelength Fiber Transceiver Module LC Duplex Connector Cisco Compatible
25G SFP28 LR SM Optical Transceiver Module 1310nm 10km For Industrial Temperatur
Compact CSFP Fiber Optic Transceiver 1.25G 2 Channel Bidi SMF 20km Duplex LC
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 2000pcs/day |
| Delivery Time | 1-3 working days | Packaging Details | 10pcs/box or 1pc/box |
| Distance | 100m over Cat.5 UTP Cable | Connector | Copper RJ45 |
| Rate | 10/100/1000Mbps | Weight | 0.025kg |
| DDM | No | Temperature | 0°C to +70°C |
| Brand Name | ANC or customized | Model Number | 1.25G Copper SFP |
| Certification | RoHS, CE, FCC | Place of Origin | China |
| High Light | optical transceiver module ，fiber optic module | ||
1.25G Copper SFP Fiber Optic Transceiver 10/100/1000M-T RJ45 Copper 100M
Description
1.25G Copper SFP Fiber Optic Transceiver 10/100/1000M-T RJ45 manufactured by ANC International Co., Limited is a high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (0°C to +70°C )
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
ROHS compliant and Lead-Free
Access to physical layer IC via 2-wire serial bus
1000 BASE-T operation in host systems with SERDES interface 10/100/1000Mbps compliant in host systems with SGMII interface
Applications
1.25G Ethernet over cat 5 cable
10/100/1000Base-TX Ethernet Application
High speed I/O for file server
Mass storage system I/O
Bus extension application
Optical Characteristics
Low-Speed Signals
MOD_DEF(1) (SCL) and MOD_DEF(2) (SDA), are open drain CMOS signals (see section VII, "Serial Communication Protocol"). Both MOD_DEF(1) and MOD_DEF(2) must be pulled up to host_Vcc
| Low-Speed Signals, Electronic Characteristics | |||||
| Parameter | Symbol | Min | Max | unit | Notes/Conditions |
| SFP Output LOW | VOL | 0 | 0.5 | V | 4.7k to 10k pull-up to host_Vcc, measured at host side of connector |
| SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 | V | 4.7k to 10k pull-up to host_Vcc, measured at host side of connector |
| SFP Input LOW | VIL | 0 | 0.8 | V | 4.7k to 10k pull-up to Vcc, measured at SFP side of connector |
| SFP Input HIGH | VIH | 2 | Vcc + 0.3 | V | 4.7k to 10k pull-up to Vcc, measured at SFP side of connector |
High-Speed Electrical Interface
All high-speed signals are AC-coupled internally
| High-Speed Electrical Interface, Transmission Line-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Line Frequency | fL | 125 | MHz | 5-level encoding, per IEEE 802.3 | ||
| Tx Output Impedance | Zout,TX | 100 | Ohm | Differential, for all frequencies between 1MHz and 125MHz | ||
| Rx Input Impedance | Zin,RX | 100 | Ohm | Differential, for all frequencies between 1MHz and 125MHz | ||
| High-Speed Electrical Interface, Host-SFP | ||||||
| Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions |
| Single ended data input swing | Vinsing | 250 | 1200 | mV | Single ended | |
| Single ended data output swing | Voutsing | 350 | 800 | mV | Single ended | |
| Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance | Zin | 50 | Ohm | Single ended | ||
| Rx Output Impedance | Zout | 50 | Ohm | Single ended | ||
Order Information
| Part number | Operating Case temperature |
| GE-GB-P1RC | 10/100/1000Mbps, SGMII interface, Copper SFP with spring latch |
| GE-GB-P3RC | 1000Mbps only, SERDES interface, Copper SFP with spring latch |
If you want to buy fiber optical transceiver, please tell us what brand and model name of Host equipment you will apply. We need to know what coding to be input for you.
Please contact our sales for customized spec.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Year Established:
2005
Total Annual:
5,000,000-8,000,000
Employee Number:
>100
Ecer Certification：
Site Member
ANC International Co., Limited is an experienced OEM & ODM manufacturer and supplier for fiber optic patch cord and pigtails, fiber optic adapters, attenuators, PLC Splitters, CWDM, DWDM, OADM, fiber switch, fiber isolator, circulator, SFP transceiver, media converter, fiber optic patch panel, t... ANC International Co., Limited is an experienced OEM & ODM manufacturer and supplier for fiber optic patch cord and pigtails, fiber optic adapters, attenuators, PLC Splitters, CWDM, DWDM, OADM, fiber switch, fiber isolator, circulator, SFP transceiver, media converter, fiber optic patch panel, t...
Get in touch with us
Leave a Message, we will call you back quickly!