Building Materials Deep Color Aluminium Frame Profile Anodized Decoration

Product Specification

Deep Color Aluminum Frame Aluminum Profile For Pergola Color Anodized Aluminum

Oxidation Treatment of Aluminum Alloy:

Anodizing:
Anodizing is a method to form a layer of oxide film on the surface of workpiece or product by using the electrolysis principle of DC and AC / DC, so as to increase the corrosion resistance and make the appearance beautiful.
Electroplating treatment:
Electroplating treatment method is a method that takes the workpiece as the cathode and the material forming the coating as the anode, puts both in the tank with electroplating solution, and then applies DC or AC / DC current to ionize the material forming the coating, run from the electroplating solution to the workpiece surface, and firmly adhere to it to form coatings of different thicknesses.
Infiltration treatment:
First remove the oil stain on the casting or product with degreasing liquid, and then wash it with warm hot water at 25 to 30 degrees for thermal insulation. Then put it into the Infiltrator, cover and seal it, vacuum to 0.7 to 0.8 PA, maintain the temperature of about 65 ℃, and then inject the prepared Infiltrator into the Infiltrator. After eight to ten hours of soaking, dry compressed air shall be introduced to keep the pressure in it at about 0.4 PA, and then for eight to ten hours. Finally, vent and take out the castings or products for air drying.
Surface spraying method:
Spraying paint on cast aluminum parts or aluminum alloy components and products is to improve their corrosion resistance. For castings or products requiring good corrosion resistance, aluminum castings or products shall be anodized or chemically oxidized before spraying. The purpose is to increase their own corrosion resistance and make the paint bond more firmly, and then brush the primer and finish paint.
Shot Peening:
The aluminum alloy casting is put into the drum of the shot peening machine and sprayed onto the casting surface with high-speed shot flow. Because the casting is constantly turning at the same time, all its surfaces are strengthened by projectile spraying.
Vacuum spraying method:
Put the product or profile to be sprayed into the vacuum chamber of the spray plating machine as the cathode, take the material forming the spray coating as the anode, close the vacuum chamber and vacuum to a certain vacuum degree. Use a high-power plasma gun to sputter the spray coating material in ionic state and deposit it on the product or profile as the cathode to form a layer of spray coating of 2-10 microns, Present a variety of bright luster.

Product Details:

Features of Electrophoresis:

(1) High temperature water sealing.

This method utilizes the hydration reaction of aluminum oxide film and water to turn the amorphous membrane into a hydrated crystalline membrane.

The hydration reaction can be carried out at both normal and high temperatures, but at high temperatures, especially at the boiling point, the hydrated crystalline membrane is a very stable and irreversible crystalline film. Therefore, the most commonly used aluminum oxide film is treated by boiling water or steam treatment.

(2) Sealing of inorganic salts.

Inorganic salt method can improve the fastness of organic coloring dyes, so it is often used in chemical coloring.

(3) Organic sealing method.

This is the soaking, soaking or coating of the aluminum oxide film. Because of the high cost and the increase of the process flow, it is not easy to use, more or more of the two kinds of methods mentioned above, and the first kind of high temperature hydration is the mainstream.

We have several references in this industry coming from our quality solutions, high level of finish and project management.

The automotive industry has extremely high standards when it comes to finish. It is all about the understanding of the customer product and customizing of the painting line to fit the product.

Controlling the line
A focal point for the automotive industry is fully control of the finishing line and the system in general. Not only the operation of the line, but the data collection for each product passing through the line. It is often essential to have the exact data and documentation of the product from the different processes of the line.

We deliver high quality solutions for the construction of the line, and the technical level of the lines makes us a leading supplier worldwide. Recipe controlling is one of many features we offer our customers.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.