SGS Approved High Hardness 316L Stainless Steel Insert Plate

Product Specification

316L Stainless Steel Stamping Parts Stainless Steel Insert Plate
 
Stainless steel stamping Parts instroduction
 

1.Stainless steel stamping parts are made of  aluminum / stainless steel / carbon steel / steel / brass

2.production process for stainless steel stamping parts: metal stamping / deep drawing / shearing / punching.

3.The operating environment is 28-200T

4. The surface of stainless steel stamping parts  is anodized / powder sprayed / painted / galvanized / silvered. The product is not easily affected by the environment during the later use, which causes other problems such as rust..

what is metal stamping?

The stainless steel stamping parts process is a metal processing method, which is based on the plastic deformation of the metal, and uses the mold and the stamping equipment to apply pressure to the sheet material to cause the plastic deformation or separation of the sheet material, thereby obtaining a certain shape, size and performance Parts (stamping parts).

The stamping forming process occupies an important position in the automobile body manufacturing process, especially the large covering parts of the automobile body, because most of the shapes are complex, the structure size is large, some are still curved surfaces, and the surface quality requirements are high, so the stamping process method Making these parts is unmatched by other processing methods. Almost all of the truck's cab, front sheet metal parts, freight car panels, various body covering parts of passenger cars and various skeletons of passenger cars are made by stamping processing methods.

Stainless Steel Stamping Parts can produce workpieces with stiffeners, ribs, undulations or flanges which are difficult to manufacture by other methods to improve their rigidity. Due to the use of precision die, the accuracy of the workpiece can reach micron level, and the repetition accuracy is high, the specifications are consistent, and holes and convex tables can be punched out. In daily production, stamping parts will encounter large or small punch size (which may exceed specifications) and large difference with punch size. In addition to considering the design size of forming convex and die, processing accuracy and blanking clearance, the above four aspects should be considered to solve.

The latest Stainless Steel Material Grade Standard Contrast

Different Types of Stainless Steel

Below is some questions you may want to know:
Questions: How to know the chemical composition of stainless steel deep drawing parts according to our requirements?

Answers: When we offer samples or batch parts, we will also send you our material list from our material factory, it shows more detailed.
Questions: How to guarantee your final size can meet our drawing request?
Answers: we will make moulds according to your 3D drawing. And we also do sampling when batch production start, to make assure the final dimension can meet your request.
Questions: How to make sure the color after painting or powder coating can be correct?
Answers: We have color card with different color number, such as RAL9016, we will contrast the sample surface and color card, to make sure the final surface effect is correct.
Questions: Generally, how do you packing the goods?
Answers: normally, for inner package: the goods is nude, for outer package: carton + plywood. If you have special request for inner or outer package, pls indicate it when you send us new inquiry.
Questions: If we find the defect products exist in the batch parts, how to do?
Answers: Yes,your caution is very good, in fact, when batch production, we need do sampling. Before shipment, we also do testing to make sure the quality is ok. If you found several defect product exists, pls take photos and send your quality feedback, we will check and send you quality products. But pls be assured that our products is qualified, unless caused by the worker's mistake to place.