T5 Aluminium Door Profiles White Powder Coating 0.8mm Thickness

Product Specification

T5 Aluminium Door Profiles White Powder Coating 0.8mm Thickness

T5 White Powder Coating Aluminium Interior Door Frame Profiles For Nigeria Market

Profile Specification:

Aluminum Door:

Bedroom Sliding door

When the bedroom space is large enough, sliding doors can be selected to separate sleeping space and other areas, such as study, cloakroom, balcony, etc., to meet the space function division. Meanwhile, double-layer hollow glass filled with argon gas has good sound insulation effect.

Opening the door can be a quiet study; closing the door can be a comfortable sleeping environment. Home, shouldn't it be so casual?

Kitchen Sliding door

Usually the kitchen is adjacent to the dining room. The sliding door can not only separate the lampblack in the kitchen, but also see the situation in the kitchen. For example, when a lover cooks soup in the kitchen, the busy figure can be seen clearly through the sliding door, which is conducive to the exchange of feelings between family members.

If the kitchen lighting is poor, the transparent sliding door can also strengthen the kitchen lighting, let the kitchen say goodbye to the dark state.

Balcony Sliding door

Many times, do not want to use partition wall directly to separate balcony and living room, you can choose sliding door. Safety, sound insulation and dust prevention are much better than sliding doors.

Spraying Aluminum Profiles Advantages:

The coating is prepared by mixing special resin, pigments and fillers, curing agent and other additives in a certain proportion, and then by hot extrusion, crushing and screening. They can be stored stably at room temperature. After electrostatic spraying, friction spraying (thermosetting method) or fluidized bed dipping coating (thermoplastic method), they are heated, baked and fused to form a smooth and bright permanent coating, so as to achieve the purpose of decoration and corrosion prevention.

Its characteristics are as follows:

1. The product does not contain toxicity, solvent and volatile toxic substances, so there are no poisoning, no fire, no emission of "three wastes" and other public hazards, which fully meets the requirements of the national environmental protection law.

2. The utilization rate of raw materials is high. The powder produced by some famous brand powder suppliers can be recycled, and the highest utilization rate can even reach more than 99%.

3. After the pretreatment of the coating material, one-time construction, without primer, can get enough thickness of the film, easy to achieve automatic operation, high production efficiency, can reduce costs.

4. The coating is compact, with good adhesion, impact strength and toughness, high corner coverage, and excellent chemical corrosion resistance and electrical insulation performance.

5. Powder coatings are safe and convenient for storage and transportation.

Aluminum Profiles Features:

Corrosion resistance

The density of aluminum profile is only 2.7g/cm3, about 1 / 3 of that of steel, copper or brass (7.83g/cm3 and 8.93g/cm3 respectively). Aluminum exhibits excellent corrosion resistance under most environmental conditions, including in air, water (or brine), petrochemicals, and many chemical systems.

conductivity

Aluminum profile is often selected because of its excellent conductivity. On the basis of equal weight, the conductivity of aluminum is nearly 1 / 2 of that of copper.

Thermal conductivity

The thermal conductivity of aluminum alloy is about 50-60% of that of copper, which is beneficial to the manufacture of heat exchangers, evaporators, heating appliances, cooking utensils, cylinder heads and radiators of automobiles.

Non ferromagnetism

Aluminum profiles are non ferromagnetic, which is an important feature for the electrical and electronic industries. Aluminum profiles are not self ignited, which is important for applications involving handling or contacting flammable and explosive materials.

Processability

The machinability of aluminum profile is excellent. In all kinds of wrought and cast aluminum alloys, as well as in the various states after the production of these alloys, the machining characteristics change greatly, which requires special machine tools or technologies.

Formability

Specific tensile strength, yield strength, ductility and corresponding work hardening rate control the variation of allowable deformation.

Recyclability

Aluminum is highly recyclable, and the properties of recycled aluminum are almost the same as that of primary aluminum.

Corporate Introdiction:

Foshan Dolphin Metal Products Co., LTD is located in Foshan Guangdong. We have been engaged in foreign trade for more than 10 years. The company has two factories in China and one in Vietnam. We provide various high-standing T5&T6 6000 series aluminum profile for doors&windows, conservatory, cabinet&wardrobe, building material and etc. With professional R&D, OEM/ODM are available. Our monthly output reaches more than 8000 Tons, so our customers come from different countries, such as Thailand, Malaysia, Singapore, Vietnam, Burma and etc.

Moreover, the company has a professional and responsible team to help our customers. All processes are visualized during thr order. Before loading, we have quality inspectors to check the products. After the order, the aftersales staff will ask for feedback. We have always been adhering to the concept that customers are friends and teachers. Every feedback is a opportunity to learn and grow. With the development of these years, Dolphin Co., LTD will be further upgraded and expanded.

Welcome to visit our company !

Choose us & contact us !

Photos: