High Quality Recycled Rubber Speed Hump Bump

Product Specification

Product Specification

 
More Features
1) Slow down drivers in the parking lot or protect cables or pipe at the facility.
2) Great for keeping shopping carts in designated shopping cart areas.
3) Recycled rubber for endurance that will not warp, chip or crack.
4) conform to surface contour and can be cut with utility knife if necessary.
5) Maintenance free, and easy to install.
6) Extremely durable recycled rubber will not warp, crack or rot.

7) Withstands wide temperature extremes.

8) Built in cats eye reflectors for added visibility.

9) Striped Yellow and Black

Rubber Speed Bump Installation Instructions:
Leave 1 inch - 3 inches between speed bumps for drainage and expansion (can be cut with a utility knife if necessary). For 4-10 trips per day with heavy trucks (i.e. garbage trucks) or an incline (i.e. parking garage), install using both adhesive and hardware. Not designed for more than 10 trucks per day or for speeds over 15 mph. Sweepers must raise brushes before driving over speed bumps. Remove speed bumps when snowplows are in use.

I. Mounting Rubber Speed Bumps on Asphalt or Gravel:
1. Drill 1/2 inch diameter pilot holes through asphalt or to depth of 3 inches.
2. Clean installation area.
3. Put black rubber speed bump in place. Put washers in place.
4. Start asphalt rebar spikes before completely setting any individual rebar spike.

II. Mounting Rubber Speed Bumps on Concrete:
1. Drill 3/4 inch holes, 2 inches deep and insert lag shield (threaded end goes in first). For maximum expansion, the shield should protrude slightly above concrete surface before setting.
2. Clean installation area.
3. Put black rubber speed bump in place. Put washers in place.
4. Insert lag screw starting all lags before tightening any. Tighten with wrench until firm resistance is felt.

 
Recycled Rubber Road Speed Hump Shows

Rubber speed bumps are widely used in our daily life, making your driving more safely.

 
Packing and Shipment
The rubber speed humps are produced, installed with cat eyes and packed for shipment all by the workers' hand carefully, in this way, we could keep the quality stable, high all the time

-------------------------------------Speed Humps' Workshop, production all in order------------------------------------

---------------------------Cat eyes installation and woven bag packing for the speed bumps------------------------
 

More Rubber Speed Humps for Your Choices

 
Warranty & Service
Please feel free to contact us for the road safety products, we could not only offer you with the high quality regular products, but also customize the products as your requirements, because we have been in this field for years, with many experienced staff working together with as well, choosing us means more competitive, more at ease.
 

Through our continual efforts to enlarge our business scope and with the supports from the customers worldwide, we have exported our products to many countries, including Chile, Colombia, Peru, Brazil, Argentina, Saudi Arabia, U.A.E, Qatar, Kuwait and India etc, receiving high praise and deep trust from our friends and partners.

Mutual benefit is our target, so Allroads people have been insisting on high quality products and more and more professional services all the time. We respect honesty and credibility, sincerely like to share these values to cooperative business ventures with partners old and new all the time going!