Wuxi Special Ceramic Electrical Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 200000p/month |
| Delivery Time | negotiable |
| Packaging Details | carton,pallet |
| Material | Steatite |
| Application | Band Heater |
| Color | white |
| Size | Customers' Requests |
| sample | available |
| Shape | Customerized |
| Name | steatite ceramic for band heater |
| Usage | Industrial Ceramic |
| Feature | Insulation |
| Brand Name | wuxi special ceramic |
| Place of Origin | Made in China |
View Detail Information
Explore similar products
High Temperature 2 Or 3 Pole 24A Steatite Ceramics Terminal Block Connector
Electrical Steatite Ceramics Tube Insulators Pipe Insulation In Different Shapes
Car Automotive Industrial Insulating Steatite Ceramics Cement Resistor
Small Ceramic Steatite Insulators Parts High Wear Resistance For Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 200000p/month |
| Delivery Time | negotiable | Packaging Details | carton,pallet |
| Material | Steatite | Application | Band Heater |
| Color | white | Size | Customers' Requests |
| sample | available | Shape | Customerized |
| Name | steatite ceramic for band heater | Usage | Industrial Ceramic |
| Feature | Insulation | Brand Name | wuxi special ceramic |
| Place of Origin | Made in China | ||
| High Light | ceramic band heater ，steatite ceramic band heater ，steatite material | ||
steatite ceramic for band heater
Ceramic Band heaters
Ceramic Band Heaters provide long life and use less wattage in plastics extrusion and injection molding applications.These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.Configuration choices allow selection of one or two piece heaters,type of closure,and type of leads/post terminals.Diameters of 2-1/4′′ or greater and widths of 1′′ to 16′′ are available.Leads normally exit 180° from gap.Options include terminal boxes,holes,heat saver(extra)insulation,3-phase power,dual voltages,partial coverages,European connectors,and perforated sheaths without insualtion for air cooled applications.To order,specify quantity,configuration,inside diameter,width,voltage,lead length if applicable and any options.
Advantage of Ceramic Band Heaters
A. Lower Operating Cost-because of superior insulation,less heat escapes to the air and less wattage is required to maintain barrel temperature.Also,the heater is safer because the external surface is much cooler.
B. Operator comfort-with the majority of the heat going directly to your process,the ceramic band heater gives off significantly less heat to ambient air than a mica band heater.
C. Longer heater life-because all materials used are rated to operate at very high temperatures.
D. Higher operating temperatures
E. Flexible-easy to install and remove
F. Dual heat transfer-heat is transferred through both radiation and conduction so a near perfect fit is not required with other heaters,such as mica heaters.
Specification
| STEATITE Main Parameter:(Chemical/physical) | ||||
| Property | Item | Unit | steatite | |
| General properties | Bulk Density | g/cm³ | 2.8 | |
| Color | - | White | ||
| Water absorption | % | 0 | ||
| Main Characteristics | Thermal Insulator | |||
| Main Applications | Various circuit parts | |||
| Mechanical Properties | Flexural Strength | Mpa | 190 | |
| Elastic Modulus | Gpa | 120 | ||
| Vickers Hardness | Gpa | 5.8 | ||
| Compressive Strength 20℃ | Mpa | - | ||
| Fracture Toughness(k l c) | Mpa*M*1/2 | - | ||
| Thermal Properties | Thermal conductivity(20℃) | w/mk | 2 | |
| Thermal Shock | ℃ | - | ||
| Coefficient of Thermal expansion (40-400℃) | 1x10-6/℃ | 7.7 | ||
| Coefficient of Thermal expansion (40-800℃) | 1x10-6/℃ | 8 | ||
| Electrical Properties | Dielectric Strength(1mhz) | kv/mm | 18 | |
| Dielectric Constant(1MHZ) | 25℃ | 6 | ||
| Volume Resistivity | ohm-cm(20℃) | ＞10^14 | ||
| ohm-cm(300℃) | 10^10 | |||
| ohm-cm(500℃) | 10^7 | |||
Our company
Wuxi Special Ceramic Electrical mainly produces alumina, Silicon nitride, Zirconia, Steatite, Boron nitride, Cordierite,mullite products, widely used in metal welding, electronic conductor, mechanics, assembling, insulation, chemicals, instrument, textile, nuclear industry, aerial field.We accept trial produce according to the drawing or sample.It usually takes 15 days to finish trial product.Mass produce usually takes 30 days.Goods' package is carton or PLT.It can be negotiable with each other.
We mainly sell goods to toshiba lighting group in Japan and Europe.Our aim is to deliver goods with high quality at quick delivery date.
Quality guarantee:mass produce by 100% inspection
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
2008
Total Annual:
>200000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our History Wuxi Special Ceramic Electrical as a leading special ceramic manufacturer,the factory is located in Chinese famous pottery town “YiXING” city about 200 km from Shanghai. From the beginning of businees ,has been dealing with export business for more than 10 years.... Our History Wuxi Special Ceramic Electrical as a leading special ceramic manufacturer,the factory is located in Chinese famous pottery town “YiXING” city about 200 km from Shanghai. From the beginning of businees ,has been dealing with export business for more than 10 years....
Get in touch with us
Leave a Message, we will call you back quickly!