Shenzhen EGQ Cloud Technology Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 10000 sets per month |
| Delivery Time | 7-15 work days |
| Packaging Details | boxs |
| Display interface | LCD segment code (22 tires with the same display) |
| Receiver port | Vehicle battery, ACC input and RS232 output（about receiver） |
| Pressure range | 0bar~14bar/0psi~203psi |
| Keyword | TRUCK TPMS FOR 10 wheeels with repeater |
| component of product | High pressure warning |
| bind belt material | 304 stainless steel |
| Brand Name | EGQ |
| Model Number | T10KZ1 |
| Certification | CE,FCC,ROHS,IATF16949:2016 |
| Place of Origin | China |
View Detail Information
Explore similar products
22 Wheel 433.92MHz 12mA Tyre Pressure Monitor System 203psi
TPMS 22 Wheel 345mAh 433.92HMz Truck Tire Pressure Sensor RS232
24 wheel built-in valve truck, AGV TPMS with repeater
8 4 Axle 433.92MHZ 135mAh Tyre Pressure Monitor System IP67
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 10000 sets per month |
| Delivery Time | 7-15 work days | Packaging Details | boxs |
| Display interface | LCD segment code (22 tires with the same display) | Receiver port | Vehicle battery, ACC input and RS232 output（about receiver） |
| Pressure range | 0bar~14bar/0psi~203psi | Keyword | TRUCK TPMS FOR 10 wheeels with repeater |
| component of product | High pressure warning | bind belt material | 304 stainless steel |
| Brand Name | EGQ | Model Number | T10KZ1 |
| Certification | CE,FCC,ROHS,IATF16949:2016 | Place of Origin | China |
| High Light | Wireless TPMS System ，Ten Tire Truck TPMS ，Ten TPMS System | ||
Internal Binding Type Ten Tire Truck Wireless TPMS System
component of product
High pressure warning
Low pressure warning
High temperature warning
Feature:
Fast Leakage Alert: Pressure leakage above 5Kpa within 5 seconds, Fast Leakage Alert’s ON and “Leakage” icon appears.
High Pressure Alert: Pressure value’s even higher than highest configured pressure limit, “High Pressure Alert’s ON.
Low Pressure Alert: Pressure value’s even lower than lowest configured pressure limit, “Low Pressure Alert’s ON.
High Temperature Alert: Temperature value’s even higher than Highest configured temperature limit, “High temperature Alert’s ON.
No Signal Alert: No signal accepted for a while, No Signal Alert’s ON.
Low Battery Alert: Battery voltage’s lower than configured value, Low Battery Alert’s ON.
Product parameters
| Receiver(22 rounds) | |
| Display interface | LCD segment code (22 wheels with the same display) |
| Receiver port | Vehicle battery, ACC input and RS232 output(about receiver) |
| Machine weight (excluding packaging) | 230gram±5gram |
| Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after disconnecting the external power supply.) |
| Working temperature | -30℃-80℃ |
| Power supply mode | Internal rechargeable lithium battery and external power supply |
| Interface voltage | Vehicle battery 24V, ACC24V |
| Built-in battery voltage | 3.5V-4.2V |
| Bright working current | 12mA |
| Black working current (for data communication) | 4.5mA |
| Reception sensitivity | -95dbm |
| Dimensions | 13.5cm*6.5cm*2.2cm |
| Pressure range | 0bar~14bar/0psi~203psi |
| type | TRUCK TPMS FOR 10 wheeels with repeater |
| color | black |
Black color Universal internal binding type ten tire Truck TPMS For Trailer Truck include repeater
| Sensor (internal binding type sensor) | |
| Plastic parts material | Nylon + glass fiber |
| Machine weight (excluding bind belt) | 30gram±1gram |
| Shell temperature resistance | -50-150℃ |
| bind belt material | 304 stainless steel |
| Power supply mode | Button Battery |
| battery model | CR2050 |
| battery capacity | 345mAh |
| Working voltage | 2.1V-3.6V |
| Working temperature | -40℃-125℃ |
| working temperature | 8.7mA |
| Self-test current | 2.2mA |
| Dormant current | 0.5uA |
| Working temperature | -40℃-125℃ |
| Transmit frequency | 433.92MHZ |
| Transmit power | >-12dBm |
| Dimensions : | 7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Operation is not suggested during driving.
Sensor monitors pressure and temperature of tire and signal to receiver, receiver reports pressure and temperature by number and voice. If there is any abnormal pressure or temperature, flashing warning icon and voice prompt will notice driver immediately.
Drivers need to check and repair the tire immediately, in order to avoid risk of accident due to tire problem.
Tires have natural micro leakage phenomenon. It is a normal phenomenon that pressure of tire decreases over time. Pressure decreasing don't have directly relationship with install this products.
It is a normal phenomenon that pressure is unstable due to thermal expansion during driving. It don't have directly relationship with install this products.
Incorrectly installation will affect the use of this product or make damage. experienced technician is preferred to install this product. please be careful not to damage the sensor transmitter when disassembling tires again. Valve of internal sensor is not available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to tie receiver by power cable, as I will damage product or effect signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all have electromagnetic interference. In order to avoid electromagnetic interference, receiver is suggest to install 50CM away from such kind of products. The best position is upper left corner, upper right corner of A column and middle of front seats (away from control)
There won't be notice if there is any change of products ( performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not receive signal under some certain condition, like interference, error operation or improper installation. If receiver can't receive signal for 10 minutes, please drive car away from current place ( maybe there is strong signal interference ) or go to authorized tire repair center to check is there any problem of sensor or battery of sensor is run out( battery life maybe shorter than normal use, as there is often abnormal condition occurs, sensor need to send signal to warn driver.)
FAQ
Q1: Could I print my own brand/ logo on the goods?
R: Sure, of course, OEM printing logo is welcomed based on MOQ.
Please show Brand Licensing and provide original logo file.
Q2. What’s the MOQ if I want to print my own brand/logo?
R: The MOQ will be decided by your customized packaging.
Q3: Can I make sample based on my demand?
R: Certainly, we have professional engineer to make a proof before order OEM mass product.
Q4: is there stock goods? What’s the MOQ?
R: Yes, we have approx 1,000 square meters as warehouse stock to ensure timely supply. The MOQ is 10 set.
Q5: How can I pay for order?
We accept Bank Transfer,Paypal, Western Union or Escrow for payment.
30% deposit is allowed for mass production.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2013
Total Annual:
1000000-10000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Shenzhen EGQ Cloud Technology Company Ltd was established in 2001. Which pays close attention to the Automotive active safety products’ R&D, manufacturing and application for a long time period “To provide occupants the most security guarantees”is our service tenet. Comp... Shenzhen EGQ Cloud Technology Company Ltd was established in 2001. Which pays close attention to the Automotive active safety products’ R&D, manufacturing and application for a long time period “To provide occupants the most security guarantees”is our service tenet. Comp...
Get in touch with us
Leave a Message, we will call you back quickly!