Single Cylinder Tesla Shock Absorbers For Model X 15-19 1027361-00-E Rear Air

Brand New Tesla Model X 15-19 Front air suspension shock absorber 1027361-00-E 1027361-00-G 1027066-00-C

Air Suspension Strut Buyer's Guide

Summary

An air suspension strut is a strut with an air spring incorporated into it. The air spring or airbag is inflated or deflated to adjust the height of the vehicle.

A faulty strut may cause your vehicle to roll when you press your brakes, squat when you accelerate, or lean to one side while you’re driving.

Driving with a bad air suspension system will not only make your ride uncomfortable but also put you and your passengers’ safety at risk.

An air suspension strut replacement usually costs around $250 to $1000, depending on the brand you choose.

Air suspension struts are essential components of an air suspension system. They work with an air suspension compressor and several other parts to provide smooth ride quality and make sure you’re in full control of your vehicle. If your air suspension struts start showing signs of failure, you must replace them immediately.

What is an Air suspension system?
Air suspension system is used to support the vehicle on the axles with an organization of air bags instead of steel spring, leaf or torsion or some coil springs. The air bags are also stated to as bellows. Suspensions with steel or torsion spring and added by the use of air bags are not considered as air suspension system. Generally the air suspension system components are used on the rear end of the vehicle. Subjected to the condition, this type of air suspension will probably have to be dealt with for leveling drives.

Air Suspension System Components
Early versions of air suspension systems were relatively simple. Air bags replaced the coil springs. The bag was inflated to the correct pressure or height with an outside compressor through a valve on the bag. Changes in technology and use added more components, and control, to the system. But today's air suspension systems all have a basic stock of similar components that vary little from maker to maker. The differences come mainly in controls and ease of installation.
Air bag material has changed little over time. The bag is a composite of rubber and polyurethane, which provides structural integrity, air-tight construction, toughness against light abrasion from road debris and sand, and resistance to salt and chemical corrosion.
The bags come in three basic shapes:
Double-convoluted bag. This bag is shaped like an hourglass. The design allows for a little more lateral flexibility than the other designs.
Tapered sleeve. This air bag performs the same as any other but is designed to fit in a tighter area and offers a little more adjustability on ride height.
Rolling sleeve. This is also a specific-application air bag. The pertinent differences between the two sleeves are really about ride height and spring control, and what's best for the vehicle and the application.
Most air suspension systems now come with an on-board compressor. The compressor is an electric pump feeding air to the bags through a series of compressed air lines. The compressor is generally mounted on the vehicle's frame, or in the trunk. The vast majority of compressors come with an attached drier. The compressor works by drawing outside air into the pump, compressing it and moving it to the bags. Outside air is often laden with moisture, and moisture can wreak havoc in a closed system. The drier uses a substance known as a desiccant to absorb as much moisture from the air as possible before the air is sent through the system.
Simpler compressor systems rely on the compressor itself to maintain, increase or decrease pressure. More advanced systems add an air tank to maintain pressure and provide an even transition between pressures. Compressors can be activated manually or automatically, and controlled solely by the driver, automatically through an electronic system, or a combination of both.

• Fit for Tesla Model X Air Strut 2015-2017
• Position:Front Left or Right Sides
• Reference OEM Number:1027361-00-E,1027361-00-G,W309250001

2015-2017 Tesla Model X Dual Motor models Model X 85D, Model X P85D etc.

Notes:

This is the Front LH or RH Firestone Air Strut Assembly for the 2015-2017 Tesla Model X Dual Motor vehicles

Fully functional, tested and working, ready to go into your Tesla! Replace that damaged or broken strut

Features
High-quality air suspension strut
Security and durability
Maximum ride comfort
Adjustable to different road and vehicle conditions
Safe load carrying capacity and stability
Ready to install
Thousands of satisfied customers worldwide

Air Suspension Shock Strut Air Absorber

FAQ

About:

Foshan Shunde Honggu Auto Parts Manufacturing Co., Ltd. Lies in Guangdong. The company introduces the advanced European and American technology, adheres to the concept of technology and quality first, adopts advanced materials, structural designs, manufacturing process and testing standards, to provide customers with safe, stable and cost-effective products. Our Company mainly develop Air spring, Air suspension ,air compressor and suspension parts for luxurious cars of after-sales markets,including Mercedes Benz, BMW,Audi, Land Rover,Porsche, VW and so on. High-top quality and competitve price help us win good reputation from our clients.And Our main markets come from Europe,Middle East, Russia and USA.

Company Culture:

Company philosophy: take it from the society and serve the society
Development philosophy: dedicated to air spring technology research, build international top air suspension products
Company spirit: honesty, innovation, harmony and win-win development

Service:

1.Quality Warranty: according to the clients' request, we could guarantee fron 12 month to 24 months.
2.Delivery time: within 7 days after getting your payments. Regarding the big orders, it need about 15-30 days.
according to our stocck and product task.
3.Quick response: We will reply to our clients within 24 hour and try our best to meet the clients request.
4.Good Service: Be Honest Forever.However you buy one pcs order or you buy more than 1000 pcs, we will sincerely reply to every client.

Advantage

1. we are top 3 of professional air suspension manufacturer in China.
2. our factory has 120 staff, and we only produce 100% newly air suspension products for 10 years.
3. we have cooperated with 80 overseas companies with stable relationships. many are also brands or big sellers at Amazon or EBAY websites.
4. we have our own cars to test our products,except normal test machine and IATF16949:2016 certificate standard.
5. we have complete production line, Mercedes Benz,BMW Audi,Porsche,Land Rover,Volkswagen-these are our products,we has complete products line.
6. Our air suspension/air compressor/air strut/air suspension parts 100% NEWLY manufactured to instead OEM
7. We manufacture air suspension/air strut/air compressor to instead OEM ;
8. Constant temperature workshop for core parts;
9. Japan automatic welding machine to weld

OEM/ODM Service:

- If you want to show your own brand LOGO on the goods such as cable, package bag, label or any where. Our OEM and ODM service is always ready to do it. Please contact with our sales team to get best support.

Packing:
- According to Standard Export Packing.
- Carton box, wooden box, wooden pallet.

Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou