Air Suspension Compressor Pump Compatible Bently Continental VW Phaeton

Air Suspension Compressor Compatible Bently Continental Volkswagen VW Phaeton 3D0616005M Air Suspension Compressor Pump 

Bentley Continental VW Phaeton Auto Chassis Parts 3D0616005M Car Air Suspension Shock

Quick Detail

Fitment:

For Volkswagen Phaeton 2004-2006
For Bentley For Continental 2003-2010

OE Number:

·3D0616005H , 3D0616005K
·3D0616005L , 3D0616005M
·3D0616005P , 3D0616007C
·3D0616007D , 3D0616007E

What are the advantages of air suspension?

1. Driving becomes more comfortable
2. Increased longevity of your car
3. Your tires will last longer
4. Better handling, regardless of the terrain
5. Improved fuel economy

An air strut with separable air springs
If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.

Air Suspension System Components
Early versions of air suspension systems were relatively simple. Air bags replaced the coil springs. The bag was inflated to the correct pressure or height with an outside compressor through a valve on the bag. Changes in technology and use added more components, and control, to the system. But today's air suspension systems all have a basic stock of similar components that vary little from maker to maker. The differences come mainly in controls and ease of installation.
Air bag material has changed little over time. The bag is a composite of rubber and polyurethane, which provides structural integrity, air-tight construction, toughness against light abrasion from road debris and sand, and resistance to salt and chemical corrosion.
The bags come in three basic shapes:
Double-convoluted bag. This bag is shaped like an hourglass. The design allows for a little more lateral flexibility than the other designs.
Tapered sleeve. This air bag performs the same as any other but is designed to fit in a tighter area and offers a little more adjustability on ride height.
Rolling sleeve. This is also a specific-application air bag. The pertinent differences between the two sleeves are really about ride height and spring control, and what's best for the vehicle and the application.
Most air suspension systems now come with an on-board compressor. The compressor is an electric pump feeding air to the bags through a series of compressed air lines. The compressor is generally mounted on the vehicle's frame, or in the trunk. The vast majority of compressors come with an attached drier. The compressor works by drawing outside air into the pump, compressing it and moving it to the bags. Outside air is often laden with moisture, and moisture can wreak havoc in a closed system. The drier uses a substance known as a desiccant to absorb as much moisture from the air as possible before the air is sent through the system.
Simpler compressor systems rely on the compressor itself to maintain, increase or decrease pressure. More advanced systems add an air tank to maintain pressure and provide an even transition between pressures. Compressors can be activated manually or automatically, and controlled solely by the driver, automatically through an electronic system, or a combination of both.

Note:
1. 12 month warranty
2. 100% quality testing before shipping.We will provide you excellent customer service and 100% satisfaction warranty.
3. Please note that we do not be responsible for any customers fee which is charged by your country.
When you take the order ,it means the buyer has agreed clearly all of our terms.If not ,please contact us before order.
Instruction is not included. Professional installation is recommended. We are not responsible for the warranty because of Artificial damage and Improper installation. Please provide photos or videos to apply for warranty. If you are not sure whether our parts fit your car please provide the VIN number of your car,we will confirm for you.

FAQ

Q1: What's your advantage?
1. Our factory manufactures high-end products with good quality, and excellentin workmanship
2. Our 1 years product warranty is much longer than other China suppliers,which can guarantee longer service life and lower maintenance rate
3. Reasonable price and professional service
4. We can also source other auto parts for you according to your detailedrequirements
5. In time delivery

Q2: How about your delivery time?
For small order (less than 20pcs), normally 3-5 working days after receivingpayment. For bigger order, normally 15-20 working days after receiving payment, or basing on the order quantity.

Q3: What's your product categories?
1.Air Suspension Shock
2.Air Suspension Spring
3. Air Suspension Compressor
4. Valve Block

Q4: How to guarantee your after-sales service?
1. Strict inspection during production
2. Recheck the products before shipment to ensure our packaging in goodcondition
3.Track and receive feedback from our customers

Q5: What will you do for customer's complaint?
We will respond quickly to our customers within 24 hours after receivingcomplaint.

Q6: What's your payment?
Various payment ways for your choice: T/T, PayPal & Western Union

Q7: What's your MOQ?
1 unit per model

Q8: Lead Time?
< 3pcs 3days
< 10pcs 7days
<50pcs about 15days
>100pcs To be Negotiated.

Advantage
1. We are top 3 of professional Auto Parts manufacturer in China.
2.Advantageous in Air Suspension Shock Absorbers, Air Compressor Pump etc..
3. Our all of our products are with high quality and competitive price.
4. Our factory had been focusing on Auto Parts Business over 12years.
5.Our products list suitable for Benz, Audi, BMW, Land Rover, Volkswagen, Porsche, Bentley, Jaguar, GMC, Jeep, Rolls-Royce, Compressor etc.
6. OEM and ODM are available
7. Monthly Production capacity is 5000pcs.
8. If order quantity is large, then price can be negotiated
9.Most of our products are exported. Europe, Middle East, Northern Europe, Eastern Europe and North America are our mainly markets. Southeast Asia, Asia Market Also available.
10. All of our products are 100% Brand New.
11. Goods will be test( 100% air leakage test, fatigue test etc.) before the shipment.
12. Warranty: 12Months