Touch Screen Cop Air Source Heat Pump Environmental Friendly

Environmental Friendly Split Air Source Heat Pump

 

With A wet desulfurization system and a wet desulfurization method. A generator and a waste water evaporator are arranged in a split heat pump system to continuously reduce the temperature of the sulfur-containing flue gas passing into the desulfurization tower to reduce it to below the acid dew point temperature and promote the smoke Gas SO3 condensation and small pollutants grow up for the first time. The sulfur-containing flue gas is used in the wastewater evaporator to evaporate the desulfurization wastewater, and water vapor is generated to be injected into the desulfurization tower to establish a supersaturated water vapor environment to promote the second growth of fine pollutants in the desulfurization flue gas. At the same time, a certain amount of cold and heat are produced by the generator and deep evaporator. The cold is used to purify the deep cooling of the flue gas, build a supersaturated water vapor environment, and promote the third growth of small pollutants, and the heat is used to heat the desulfurization The tower purifies the flue gas to increase its temperature and eliminate the phenomenon of white smoke. In turn, the goal of removing fine pollutants from the desulfurization flue gas, eliminating white smoke, and reducing desulfurization wastewater emissions.

Leomon heat pump allows to reduce up to 80% of the energy consumption of a house, using a renewable source of energy that minimizes the CO2 emissions to the environment.

Years of reserch and studying, Our R&D department was able to produce a very compact and easy to install heat pump keeping on it all the controls necessary to regulate your house temperature. our heat pumps is able to work in very extreme weather conditions(-30℃) keeping it's high performance.

An icing and antifreezing device for a casing heat exchanger and a manufacturing method thereof are adopted, and belong to the field of heat pumps. This
A tube-in-tube heat exchanger icing and anti-freezing device includes a tube-in-tube heat exchanger composed of a concentric inner tube and an outer tube, and a plurality of inflatable elastic balls are arranged at equal intervals in the inner tube. The inflatable elastic ball is a butyl rubber ball. The gas inflated inside the inflatable elastic ball is nitrogen. Furthermore, the inflatable elastic ball is adhered and fixed to the inner tube. The diameter of the inflatable elastic ball is half of the diameter of the inner tube. Furthermore, the total volume of the inflatable elastic ball is 0.4 times the internal volume of the inner tube. It can achieve the effects of not being easy to freeze and anti-freezing, and has a simple structure and low cost.

Specification of Environmental Friendly Split Air Source Heat Pump

Unit type		SJKRS-28 II/C	SJKRS-36II/C	SJKRS-55 II/C	SJKRS-73 I/C	SJKRS-106 IC	SJKRS-I60II /C
Specifications		7.5HP	10HP	15HP	20HP	30HP	40HP
Power supply		Three-phase five-wire380V/50Hz
Heating mode		Direct heat/cycle type
Standard working condition	Heating capacity( kw )	27.5	36.7	55.1	72.8	10.6.5	155.1
	Input Power(kW)	6.1	8.2	13.7	16.1	23.6	34.5
	COP	4.5	4.5	4.5	4.5	4.5	4.5
	Hot Water flow(m³/h)	0.59	0.79	1.18	1.56	2.29	3.33
High temperature condition	Heating capacity kw )	23.9	28.5	51.5	59.5	89	13.1.5
	Input Power(kW)	7.5	8.9	16.1	18.6	27.8	41.1
	COP	3.2	3.2	3.2	3.2	3.2	3.2
	Hot Water flow(m³/h)	0.27	0.33	0.59	0.68	1.02	1.51
Low temperature condition	Heating capacity( kw )	17.3	21.4	34.8	41.5	62.2	94.5
	Input Power(kW)	6.2	7.6	12.4	14.8	22.2	33.8
	COP	2.8	2.8	2.8	2.8	2.8	2.8
	Hot Water flow(m³/h)	0.32	0.4	0.65	0.78	1.16	1.77
Component Information	Size of water pipe joint	DN20		DN25		DN32	DN40
	Water heat exchanger	Plate or sleeve heat exchanger
	Air Heat Exchanger	Aluminum Fin for copper tube
	compressor type	Semi-closed reciprocating
	Operation Panel	Color touch screen
Maximum outlet temperature(℃)		90℃
Refrigerants		R744 (CO2 )
Design pressure(MPa)		High side 15, low side 8
Dimensions (length, width and height mm)		1450x950x1450	1600x950x1500	1850x1150x1900	2050x1150x1950	2670x1410x2150	2290x2270x1980
Noise (dB)		56	59	62	67	70	70
Weight(kg)		550	660	780	860	1180	221360
SCOPE of use	Feed water temperature(℃)	5~ 40
	Feed water pressure	0.05~ 0.4
	Effluent temperature(℃)	55~ 90
	Maximum flow	1.2	1.5	2.4	3.2	4.9	6.5
	Ambient temperature(℃)	’-20~43