Outdoor Led Tape Lights Waterproof , 5050 Led Strip Lights With Remote

Product Specification

LED Flexible Strips Light DC12V Epistar SMD5050 RGB IP65 Waterproof 30LED 60LED

1. Description:

RGB LED Strips need a power supplier and a 24key RGB controller to control the led strips, use the controller, you can change everycolor you want. It  use SMD 5050 RGB led chips, also SMD3014 RGB LED Chips. SMD5050 RGB LED Strips have 2 model, one model is 30pcs led chips per meter, another is 60pcs led chips per meter. So the power is different. One is 7.2W per meter, another is 14.4W per meter. Both 2 types voltage is DC12V, can make IP20 non waterproof, only can use indoor. And IP65, IP67 and IP68 are waterproof, which can use for outdoor lighting.

2. Products Specification:

3. Scope of application: 

Domestic users also like to search on Baidu by using the LED soft light bar or the soft light bar. The same product has different names, but the applicable population is different. LED light bar, LED light bar has been widely used in furniture, automobiles, advertising, lighting, ships and other industries.
Countertop glass and glass corners, straight or arc. Applicable occasions: jewelry cabinets, cosmetics cabinets, boutique cabinets, wine cabinets, glassware cabinets, cultural relics display cabinets, medicine cabinets, bar counters, supermarket refrigerated display cabinets, etc.

4. Advantages:

1. High luminous efficieny and color temperature consistency

2. Easy to install with 3M Self-adhesive or matched mounting clip

3. 5 meters per roll packed in anti-static bag

4. Dimmable Brightness and changeable color as you like

5. Energy conservation and environmental protection, green products

6. Convenient transportation, not easy broken

7. Waterproof performance is strong, suitable for outdoor installation

5. Operating instruction for RGB LED Strip:

5.1. Specification for power supply:

Supply voltage:110-220VAC / 50-60HZ

Output voltage: DC12V

Output power: 5A/60W 2A/24W

Product Size: 145*65*85mm

Output: 3 channels RGB signal

Max load: 5 meters

Working temperature: -20~60℃

Control mode: Infrared remote controller

5.2. The 24 key infrared remote controller for use:

5.3. 24 Key RGB controller Description:

1. When the static, “ Brightness+ ” “ Brightness- ” to adjust the brightness of colors.

2. Dynamic time, “ Speed+ ” “ Speed- ” to adjust the speed of change, to facilitate debugging, is only divided into “high speed” “medium speed” “slow speed” “slowest” total four kinds of speed.

3. Dynamic static free to switch, and has a memory function, you can save the state before power.

5.4. 24 Key RGB Controller Function:

1. In constant power, press the OFF button and then press the ON key, the controller can remember the previous state of the LED

2. After lighting in LED, turn off the power 30S, and then turn on the power, the controller can remember the previous state of the LED

3. After lighting the LED, turn off the power, and then turn on the power, the controller will automatically enter the next state.