Product description for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

1. PL870 is a single-component polyurethane adhesive for bonding glass, which cures when exposed to moisture.

2. It provides excellent sealing performance and cohesion, ensuring a strong bond.

3. This adhesive does not corrode or pollute the bonded substrate, making it environmentally friendly. It also exhibits good adhesion to metals,        glass, and other substrates.

4. It is specifically designed for windshield and side glass applications.

Product application for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

1.Maintenance and repair of automotive windshields and side window glass through bonding and sealing techniques.

2.Exhibits excellent adhesion to various substrates, including glass and aluminum plates.

3.Specifically formulated for the installation and sealing of glass in low-speed electric vehicles.

4.Designed for achieving high-strength adhesion between glass and the body of various vehicles.

5.Suitable for use in buses, cars, railway vehicles (metros, high-speed trains), ships, spacecraft, engineering machinery vehicles, carriages, and  other types of vehicles. Widely utilized in high-end car dealerships and for special vehicles.

Product features for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

1. Excellent adhesion and sealing properties with high bond strength. No primer required.1. Environmentally friendly with no harmful emissions after curing, ensuring safety for humans.
2.Easy to apply due to good thixotropic and extrusion properties, allowing for convenient construction.

3.Single-component formula that cures with moisture, suitable for vertical application without dripping.
4.Can withstand high dynamic loads without sagging during application interruptions.
6. Offers good resistance to aging and weather conditions.

Technical data table for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

Attention:

Fast and keep away from children; Avoid contact with eyes and skin before curing. In case of accidental contact with skin, first scrub with soapy water or alcohol, and then rinse with clean water. In case of contact with eyes, rinse with plenty of water first, and seek medical advice immediately if necessary.

Directions for Use  for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

Tool: Pneumatic plunger caulking gun

Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt,

old sealants and any protective coating.

Steps:

1. Cut nozzle to give the required angle and bead size

2. Pierce the membrane at the top of the cartridge and screw on the nozzle

3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength

Packing:

Substrate pretreatment for One-component PU adhesive sealant Primerless Eco-friendly high bonding strength

The surface of the bonded substrate must be clean and dry without dust, oil and water stains. The bonded
substrate should be cleaned and pretreated with detergent or primer. If it is not, it may cause bonding failure. The glue shall be applied and cured according to the construction method, and the safe driving time is related to the ambient temperature and humidity.

Construction
Ambient temperature and humidity have a great impact on the surface drying and curing of glass adhesive. It
is recommended that the construction ambient temperature be 5 ~ 35 ℃, and the humidity be 50 ~ 70% RH. When the temperature is lower than 5 ℃, it is recommended to put the product in an environment of
30-40 ℃ for heating for 1H before use (the heating time cannot exceed 3H)
The construction method can refer to the construction instructions or consult our technicians.

Storage:
Sealed and stored in a low temperature and dry place. It is recommended to store in an environment with a
temperature of 5~25 ℃ and a humidity of ≤ 50% RH.
Storage period: 9 months

Transportation: moisture proof, rain proof, sun proof, high temperature proof, keep away from heat source, handle with care, and do not squeeze or collide.