Shenzhen Fire Power Control Technology Co., LTD
| Payment Terms | T/T |
| Supply Ability | 1000/month |
| Delivery Time | 10 days for sample |
| Packaging Details | carton with sponge |
| Product name | dynamic north seeker |
| Span ( (/s) | 100 |
| Zero ( (/H, 1σ) | 0.1 |
| Zero-bias stability ( (/H, Allan) | 0.02 |
| accelerometer range | 2g |
| Bandwidth | 50Hz |
| Power | 5~12v |
| Output | RS422 |
| Brand Name | Firepower |
| Model Number | NF701 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
FOG Based Gyro North Finder RS422 Serial Interface 24V
High Accuracy Gyro North Finder Fog North Seeking Fiber Optic Gyro
MEMS Dynamic North Finder Six Axis For Navigation Control Measurement
Dynamic Gyro North Finder 10m CEP Precise North Seeker 0-360 Degree
Product Specification
| Payment Terms | T/T | Supply Ability | 1000/month |
| Delivery Time | 10 days for sample | Packaging Details | carton with sponge |
| Product name | dynamic north seeker | Span ( (/s) | 100 |
| Zero ( (/H, 1σ) | 0.1 | Zero-bias stability ( (/H, Allan) | 0.02 |
| accelerometer range | 2g | Bandwidth | 50Hz |
| Power | 5~12v | Output | RS422 |
| Brand Name | Firepower | Model Number | NF701 |
| Place of Origin | CHINA | ||
| High Light | 0.1deg Precise North Seeker ，Precise North Seeker 2g | ||
precise north seeker, 0.1deg azimuth accuracy sensor
Environmental requirements
1) Working temperature: -40℃～+65℃;
2) Storage temperature: -45℃～+70℃.
3) Sand and dust: Under the sand and dust conditions specified in Article 2 of GJB150.12, the following conditions shall not occur in the fiber optic gyroscope north finder:
a. The organization is too tight, stuck or malfunctioning;
b. Electrical components are short-circuited or cannot work normally;
c. The internal mechanical parts are dusty.
4) Salt fog
The fiber optic gyroscope north finder should meet the salt spray conditions of GJB150.11.
5) Humid and hot environmental conditions
Relative humidity: 95%; temperature: 30±2C; storage time 72 hours.
The insulation resistance should not be less than 2 MΩ, the metal surface should not be corroded, and the coating should not be blistered or peeled off, and it can work normally.
6) Vibration environment
Sinusoidal scanning vibration environment requirements
Frequency range: 5Hz~5.5Hz, vibration displacement (double amplitude) 25.4mm
Frequency range: 5.5Hz~200Hz, vibration acceleration 1.5g;
Scan time: 12min;
Vibration direction: 3 axes (X axis, Y axis, Z axis);
Each axis: 2h;
7) Impact environmental conditions
Impact waveform: half-sine pulse
Peak acceleration: 20g, pulse width 11ms,
Number of impacts per axis (X-axis, Y-axis, Z-axis): 3
8) Crash environmental conditions
Peak acceleration: 10g
Pulse width: 16ms
Collision rate: vertical axis 80 times/min
Collision times: 1000±10 times
Collision direction: vertical installation plane
9) Environmental requirements for sports cars
The road sports car has a mileage of 500 km. in:
Dirt road and gravel road: The speed is 20-30 km/h, 300 km.
Asphalt road and concrete road: the vehicle speed is 30-40 km/h, 200 km.
10) Electromagnetic compatibility
The electromagnetic compatibility refers to the relevant requirements of GJB151A-97 "Electromagnetic Emission and Sensitivity Requirements for Military Equipment and Subsystems".
11) Magnetic field
The performance characteristics of the gyro north finder under the condition of the magnetic induction intensity of (3±0.5)×10-4T should meet the technical index requirements.
Specifications
| Main technical parameters | ||
| Parameters | NF701 | Unit |
| North seeking accuracy (1σ) | ≤0.1 | ° |
| North seek time | ≤ 3 | min |
| Horizontal accuracy (pitch and roll) | ≤0.05 (1σ) | ° |
| Circular linearity (1σ) | ≤0.1 | ° |
| Power-on preparation time | 6 | min |
| interface | RS422 | / |
| Weight | <5.5 | Kg |
| Dimension | 150×170×172 | mm |
| Working mode | After power on, it start self-test. After the self-test completed, it will response to the upper computer’s north seek command. And after north seeking, the north seeking result will be sent to upper computer. | |
| Environment requirements | ||
| Operating temperature | -40 ~ +65 | ° C |
| Storage temperature | -45~ +70 | ° C |
| Relative humidity | 95 | % |
| Appearance | The metal surface shall not be rusted, and the coating shall not cause blistering or peeling. | |
| Electrical performance | ||
| Power supply | 24±4V | |
| Power consumption | <30W | |
| Insulation resistance | The insulation resistance between the individual circuits of the gyro north finder and its circuit and housing shall be not less than 10 MΩ under standard atmospheric conditions. | |
| maintainability | ||
| MTBF | ≥1000 | hrs |
| MTTR | ≤30 | min |
Application
Product Drawing
ABOUT FIREPOWER
Firepower Technology (Shenzhen) Co., Ltd. was established in 2013 and registered in Shenzhen Nanshan High-tech Park. The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, rate table and other products.
Firewpower technology has invested in several automatic production lines in xi'an, shenzhen,hebei, including fiber optic gyroscope, mems inertial navigation, quartz accelerometer, electronic countermeasure communication products, inertial simulation equipment production lines in china. Firepower technology always puts scientific research innovation, technological exploration and self-control in the first place.
The company has developed a series of autonomous navigation products with independent intellectual property rights, which are specially used in the field of autonomous navigation including uavs, vehicles, ships with the self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products to solve the current position, three-dimensional attitude and speed of the user carrier, realizing the autonomous navigation control of the carrier.
QUALIFICATION FIREPOWER
Firepower technology belongs to "national High-tech Enterprise" and has obtained "national Military Standard System Certification", "Level II Confidentiality ," Qualification Of Weapon And Equipment Manufacturing (class A)". It has become one of the enterprises with complete qualifications for obtaining four certificates of military industry in shenzhen now it has obtained 17 authorized patents, including 3 invention patents, 4 utility models and other patents.there are 20 + patents, and 5 national defense patents have been submitted.
Development Policy: One Heart, Two Integration, Three Leading Four Autonomy
"One Heart"
Firmly Dedicated To Patriotism And Serving The Country, And Earnestly Fulfilling The Mission Of Strengthening The Country;
"Two Integration"
Implementing The New Development Mode Of"civil-military Integration" And "industrial Integration";
"Three Leading
Become "leading In Innovation, Leading In Cultural Strength And Leading In Competitiveness" A World-class Chinese National Leading High-tech Enterprise;
"Four Autonomy"
Stick To The Development Route Of Hardware Autonomy, Software Autonomy, Scheme Autonomy And Produc Tion Autonomy
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
10000000-15000000
Employee Number:
60~100
Ecer Certification：
Verified Supplier
Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of aerospace electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is ... Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of aerospace electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is ...
Get in touch with us
Leave a Message, we will call you back quickly!