Three Phase 4 Axis Tension Control Servo System For Printing Machine

Product Specification

Three Phase 220/380V 4 Axes Tension Control Servo System Used for Printing Machine

VEC-VCJ tension control servo has built-in multiple tension control modes: including closed loop speed mode,

closed loop torque mode, open loop speed mode, and open loop torque mode. Vikeda provides a full-servo

tension control solution, with VEC-VCJ tension control dedicated servo as the core, adopts different tension

control modes for different machines, and integrates the tension controller into the servo drive. TheTension

control system consists of a man-machine interface, a special servo for tension control, and a tension sensor.

It can realize the open loop tension control of rewinding and unwinding, the closed loop tension control of

rewinding and unwinding, and the process tension control. Achieve high precision, high stability,

maintenance-free and energy-saving effects.

Products Features

1.Stable start, no jitter at low speed;

2.Servo products are maintenance-free and have a service life of 6-10 years.

3. Calculate the winding diameter with the special algorithm of the servo, the system is simple, efficient and accurate;

4. During acceleration, deceleration or emergency stop,The tension is stable, and the tension accuracy is controlled Within 1%-5% of the sensor range;

5.The rewinding and unwinding diameter has a wide range, Basically unlimited;

Servo System Solution

How to slect the Servo Drive+Servo Motor

How to installation the servo Drive and connecting with Servo Motor?

Installation:

● Install the driver on a dry and sturdy platform. Maintain good ventilation and

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified

distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.

● When installing, do not block the suction and exhaust ports, and do not allow foreign objects inside the

product to enter, otherwise it may cause malfunction or fire due to aging of internal components.

● Do not place heavy objects on or under this product as this may result in injury.

● Please install in the following environment:

1.places without direct sunlight;

2.Locations where the ambient temperature is in the range of 0 ° C to 55 ° C;

3.Relative humidity in the range of 0% to 95%, and no condensation;

4.Locations free of water droplets, vapors, dust and oily dust;

5.Locations where there is no high heat device;

6.Non-corrosive, flammable gas and liquid sites;

7.It is not easy to splash water, oil and medicine;

8.places that are not exposed to radioactive radiation;

9.Strong and vibration-free places;

10.Locations where there is no electromagnetic noise interference.

Packing and Shipping

Delivery Time

1. For small order we always can delivery out within 1 week.

2. Our products can be shippied via Air, Land or Sea.

Accessories

	Accessory name	Image
Satandard Spare Parts	Power terminal		Adapt to E1,E2 structure drive
	Cn3 encoder plug		Encoder plug on the driver side
	Cn4 control terminal plug		Input/output signal terminals,user wiring
	Encoder connection line		The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer needs Provide independent connector
	Power line		The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer needs Provide independent connector
	Drive monitoring line		Connect and adjust the software for remote monitoring and firmware update
Purchasing Spare Parts	USB to RS232 Adapter cable		If necessary, self purchase
	Ethernet communication line		If necessary, self purchase

CE Certificates

1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the

variable speed electric driver system), corresponding to the national standard GB12668.501-2013;

3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility

standards and its specific test methods), corresponding to the national standard GB12668.3-2012.