ShenZhen Vector Technology Co., Ltd.
| Payment Terms | T/T, Western Union, L/C |
| Supply Ability | 500 kits/month |
| Delivery Time | 3-5 work days |
| Packaging Details | 280*208*78mm,375*290*155mm |
| Voltage | 380V |
| Power | 4.3KW |
| Phase | Three Phase |
| Communication Protocols | EtherCAT/CanOpen |
| Encoder | 2500 pulse incremental; |
| Rated Current | 12A |
| Input | Pulse/Analog |
| Control Mode | Position / Torque |
| Application | Mechanical Arm |
| Product Name | Srevo Drive Servo Motor |
| Brand Name | Vector |
| Model Number | VEC-VC-01233H-M-E |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Three Phase CanOpen Multi Axis Servo Drive For Automation Motion Control
Modbus 22KW Programmable Servo Drive With Pulse Input Output
60mm AC Servo Driver Custom Servo Drive For Label Marking Machine
Single Phase 750 Watt Multi Axis Servo Drive With 3M 5M Cable
Product Specification
| Payment Terms | T/T, Western Union, L/C | Supply Ability | 500 kits/month |
| Delivery Time | 3-5 work days | Packaging Details | 280*208*78mm,375*290*155mm |
| Voltage | 380V | Power | 4.3KW |
| Phase | Three Phase | Communication Protocols | EtherCAT/CanOpen |
| Encoder | 2500 pulse incremental; | Rated Current | 12A |
| Input | Pulse/Analog | Control Mode | Position / Torque |
| Application | Mechanical Arm | Product Name | Srevo Drive Servo Motor |
| Brand Name | Vector | Model Number | VEC-VC-01233H-M-E |
| Certification | CE | Place of Origin | China |
| High Light | EtherCAT Multi Axis Servo Drive ，12A Multi Axis Servo Drive ，12A EtherCAT Servo Drive | ||
EtherCAT Multi Axis Srevo Drive Servo Motor For Mechanical Arm
Products Description
| Product Name | Srevo Drive Servo Motor |
| Brand | Vector |
| Model No. | VEC-VC-01233H-M-E |
| Power | 4.3KW |
| Input | Pulse/Analog |
| Voltage | 380V |
| Phase | Single/Three Phase |
| Rated Current | 12A |
| Communication Protocols | Modbus/CANopen/EtherCAT |
| Encoder | 2500 pulse incremental; |
Wiring precautions
● It is recommended not to use single-phase 220V for main power supply,
which may cause damage to electrolytic capacitor due to lack of phase.
● Do not change the wiring during power-on, otherwise it may cause electric
shock or injury.
● Please perform wiring or inspection by professional technicians, otherwise it
may cause electric shock or product failure.
● Please carefully confirm the wiring and power supply. The output circuit
may be short-circuited due to wiring errors or application of different voltages.
The brake does not operate when the above fault occurs, which may result in mechanical damage or personal injury.
● Do not connect the input power cable to the U, V, and W terminals of the
drive. Otherwise, the servo driver will be damaged.
● When wiring, do not pass the power cable and signal cable through the same pipe, and do not bundle them together.
The distance between the two should be more than 30cm to avoid interference.
● The driver ground terminal must be grounded to avoid leakage and reduce the interference of the system,
and the diameter of the ground wire should be the same as or above the power supply line.
● When connecting the AC power supply and DC power supply to the servo unit, connect to the specified terminal.
Failure to do so may result in malfunction or fire.
● For the wiring length, the command input line is up to 3m and the encoder
line is up to 20m.
● Use a twisted-pair shielded cable for the signal cable and encoder cable, and
ground the shield with a single end.
●The U, V, W terminals of the driver and the U, V, and W terminals of the
motor should be connected one by one according to the name. If it is wrong connected, the motor cannot operate normally.
● Common DC bus products require pressure sensitive resistors and the wiring
is secure.
● Please check the power after the power is off for at least 5 minutes. Even if
the power is turned off, high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5 minutes after the power is turned off, otherwise it may cause electric shock.
● Do not turn the power ON/OFF frequently. When it is necessary to
continuously turn ON/OFF the power, please control it once or less in 1 minute. Since the power supply section of the servo driver has a capacitor, a large charging current (charge time of 0.2 seconds) flows during the ON/OFF power supply. Therefore, if the power is turned ON/OFF frequently, the performance of the main circuit components inside the servo driver will be degraded.
● Do not apply power when the terminal block screws are loose or the cable is
loose. Otherwise, it may cause fire.
● Take appropriate shielding measures in the following locations, otherwise
the machine may be damaged:
1. Locations that cause interference due to static electricity;
2. A place that produces a strong electric field or a strong magnetic field;
3. Locations where there may be radiation radiation;
4. A place with a power cord nearby.
The panel contains 5 buttons and 5 digital tubes.
The general functions of the five buttons are shown in the table below.
|
Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current, Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols: Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;
Q3. What's the power range about our servo system?
A: Our Power range covers 0.2-110KW, reach your requirements;
Q4. What's the encoder feedback interfaces we using?
A: We have multiple Encoder feedback interfaces, like : incremental/wire-saving encoder,
17-bit/23-bit/24-bit absolute encoder, resolver encoder, etc.
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of
the variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Quantity | 1-5 kits | 50-100 kits | 200-500 kits |
| Delivery time | Within 3 days | 5-10 days | 15-25 days |
| Packing details of Servo Drive | |||||
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) | C015(32-38A) | C022(45-60A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 | 440*296*288 | 510*305*325 |
Our Team:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
100,000,000-200,000,000
Employee Number:
50~100
Ecer Certification：
Active Member
Focusing on industrial automation products with independent intellectual property rights, we are positioned to serve high end equipment manufacturers and provide overall solutions for customers in market segments. To become the world's leading provider of industrial automation products and solut... Focusing on industrial automation products with independent intellectual property rights, we are positioned to serve high end equipment manufacturers and provide overall solutions for customers in market segments. To become the world's leading provider of industrial automation products and solut...
Get in touch with us
Leave a Message, we will call you back quickly!