ShenZhen Vector Technology Co., Ltd.
| Payment Terms | T/T, Western Union, L/C |
| Supply Ability | 500 kits/month |
| Delivery Time | 3-5 work days |
| Packaging Details | 280*208*78mm,375*290*155mm |
| Voltage | 220V |
| Power | 1.5KW |
| Phase | Single/Three Phase |
| Communication Protocols | CanOpen/EtherCAT |
| Encoder | 17/23bit Tamagawa absolute encoder; |
| Rated Current | 6A |
| Input/Output | Pulse/Analog |
| Control Mode | Location / Speed / Torque |
| Application | Packing machine |
| Product Name | AC Servo Motor System With Factory Price |
| Brand Name | Vector |
| Model Number | VEC-VC1-00623MC-M-E/130MB-1R525A23F-CF2 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
55kw Closed Loop Servopack With 2500 Pulse Incremental Hall Encoder
1500w 3000rpm AC Servo System EtherCAT Bus Type
4Nm 2500rpm Multi Axis Servo System For Cutting Machine
3 Phase 6Nm AC Servo System With Absolute Encoder
Product Specification
| Payment Terms | T/T, Western Union, L/C | Supply Ability | 500 kits/month |
| Delivery Time | 3-5 work days | Packaging Details | 280*208*78mm,375*290*155mm |
| Voltage | 220V | Power | 1.5KW |
| Phase | Single/Three Phase | Communication Protocols | CanOpen/EtherCAT |
| Encoder | 17/23bit Tamagawa absolute encoder; | Rated Current | 6A |
| Input/Output | Pulse/Analog | Control Mode | Location / Speed / Torque |
| Application | Packing machine | Product Name | AC Servo Motor System With Factory Price |
| Brand Name | Vector | Model Number | VEC-VC1-00623MC-M-E/130MB-1R525A23F-CF2 |
| Certification | CE | Place of Origin | China |
| High Light | 1.5kw AC Servo System ，130mm AC Servo System ，130mm AC Servo Motor System | ||
2500rpm 6n. M 1.5kw 130mm AC Servo Motor System With Factory Price
| Voltage | Control Mode | Single-phase / three-phase full-controlled rectification SVPWM modulation |
| Encoder | Encoder Feedback | 2500 pulse incremental + Hall encoder; 2500 pulse incremental; 17bit Tamagawa absolute encoder; 23bit Tamagawa absolute encoder; 24bit Nikon absolute encoder; |
| Pulse Command Input | Pulse Type | Differential input,Open collector |
| Frequency Range | Differential input:0-500kHz,pulse width greater than 1us Open collector: 0-300kHz,pulse width greater than 2.5us | |
| Pulse Mode | pulse + direction; AB pluses; CW+CCW; | |
| Analog Input | Voltage Range | -10V to 10V |
| Input Impedance | 10kΩ | |
| Maximum Frequency | 1.5kHz | |
| DI/DO Interface Type | NPN/PNP | |
| Communication | Modbus/CANopen/EtherCAT | |
Products Description
| Product Name | 2AC Servo Motor System With Factory Price |
| Brand | Vector |
| Model No. | VEC-VC1-00623M-M-E |
| Power | 1.5KW |
| Input/Output | Pulse/Analog |
| Voltage | 220V |
| Phase | Single/Three Phase |
| Rated Current | 6A |
| Communication Protocols | CanOpen / EtherCAT / Modbus |
| Encoder | 17 / 23 bit absolute encoder; |
Installation:
● Install the driver on a dry and sturdy platform. Maintain good ventilation and
heat dissipation during installation and maintain good grounding.
● Please install in the specified direction to avoid malfunction.
● When installing, please ensure that the servo driver is kept at a specified
distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.
● When installing, do not block the suction and exhaust ports, and do not allow foreign objects inside the
product to enter, otherwise it may cause malfunction or fire due to aging of internal components.
● Do not place heavy objects on or under this product as this may result in injury.
● Please install in the following environment:
1.places without direct sunlight;
2.Locations where the ambient temperature is in the range of 0 ° C to 55 ° C;
3.Relative humidity in the range of 0% to 95%, and no condensation;
4.Locations free of water droplets, vapors, dust and oily dust;
5.Locations where there is no high heat device;
6.Non-corrosive, flammable gas and liquid sites;
7.It is not easy to splash water, oil and medicine;
8.places that are not exposed to radioactive radiation;
9.Strong and vibration-free places;
10.Locations where there is no electromagnetic noise interference.
| Installation Environment Requirements | Atmospheric Pressure | 86~106kPa |
| Mbient Humidity | 0~55℃ | |
| Ambient Temperature | 0~90%RH | |
| IP Rating | IP20 | |
| Vibration | 0~4.9m/s^2 |
Maintenance and inspection Precautions
● do not change the wiring while the power is on, otherwise it may cause electric shock or injury.
● please perform wiring or inspection by professional technicians, otherwise it
may cause electric shock or product failure.
● please check the power after the power is off for at least 5 minutes. Even if the power is turned off,
high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5 minutes
after the power is turned off, otherwise it may cause electric shock.
●when replacing the servo drive, please back up the servo driver user parameters to be replaced before the
replacement, and transfer the backup to the new servo drive, and then restart the operation, otherwise the
machine may be damaged.
Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current, Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols: Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Packing details of Servo Drive | |||
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 |
Our Team:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
100,000,000-200,000,000
Employee Number:
50~100
Ecer Certification：
Active Member
Focusing on industrial automation products with independent intellectual property rights, we are positioned to serve high end equipment manufacturers and provide overall solutions for customers in market segments. To become the world's leading provider of industrial automation products and solut... Focusing on industrial automation products with independent intellectual property rights, we are positioned to serve high end equipment manufacturers and provide overall solutions for customers in market segments. To become the world's leading provider of industrial automation products and solut...
Get in touch with us
Leave a Message, we will call you back quickly!