Dongguan Dezhijian Plastic Electronic Ltd
| Payment Terms | L/C, T/T, Western Union, D/A, D/P, MoneyGram |
| Supply Ability | 9999 rolls per week |
| Delivery Time | 3-5 days |
| Packaging Details | We use plastic tray, the net weight 1.0KG, we put desiccant in it, use vacuum package, every tray into a small box, and the each 8 small box into a master carton. Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding carton 43.5*43.5*18cm |
| Size | 1.75 /3.0 mm |
| Colors | 12 Colors |
| The tolerance roundness | ±0.02mm |
| Print temperature | 200℃ -240℃ |
| floor temperature | 100℃ - 1200℃ |
| Filament Net Weight | 1kg/Spool |
| Length | 335m/132m |
| Gross Weight | 1.3kg/Spool |
| Brand Name | PINRUI |
| Model Number | PETG |
| Certification | FDA SGS MSDS |
| Place of Origin | China |
View Detail Information
Explore similar products
340m 5kg 0.5kg ABS PLA 3d Printer Filament
Non-toxic Colorful 1.75mm PLA Filament For 3D Printer Material Small Shrinkage
PLA Filament 3d printer filament 1.75 / 3.0 mm
3D Printer Material Glow In The Dark Filament Green1.75 / 3.0mm PLA
Product Specification
| Payment Terms | L/C, T/T, Western Union, D/A, D/P, MoneyGram | Supply Ability | 9999 rolls per week |
| Delivery Time | 3-5 days | Packaging Details | We use plastic tray, the net weight 1.0KG, we put desiccant in it, use vacuum package, every tray into a small box, and the each 8 small box into a master carton. Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding carton 43.5*43.5*18cm |
| Size | 1.75 /3.0 mm | Colors | 12 Colors |
| The tolerance roundness | ±0.02mm | Print temperature | 200℃ -240℃ |
| floor temperature | 100℃ - 1200℃ | Filament Net Weight | 1kg/Spool |
| Length | 335m/132m | Gross Weight | 1.3kg/Spool |
| Brand Name | PINRUI | Model Number | PETG |
| Certification | FDA SGS MSDS | Place of Origin | China |
| High Light | 3d printing pla filament ，pla 3d printer material | ||
12 Colors PETG 3d Printer Filament For 3D Printing
PETG 3D printer filaments information:
PETG is a very tough material with good thermal resistance. Its use is universal but especially suitable for mechanical parts and both indoor and outdoor use. PETG has almost no warping, so printing large objects isn’t a problem. We use PETG to print parts for our printers!
The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET, so that it’s easier to print, less brittle and clearer when printing with semi-transparent variants. PETG has a low thermal expansion, so even when printing big objects, and without an enclosure, it rarely lifts from the bed and warps. In addition to that, PETG is ductile. It has a healthy amount of flex which can prevent parts from breaking under pressure.
Unlike PLA or ABS, PETG tends to ooze a bit and may leave strings of plastic on your print. You can fight this with increasing retraction and playing with hotend temperature, but if you use our filament presets in Slic3r or Prusa Control, we already did that for you and the amount of stringing is minimal. If you witness a tiny bit of stringing anyway, you can get rid of it by quickly blasting your finished prints with a heat gun.
Parameter
| Filament Diameter | 1.75/3.00mm |
| Tolerance | ±0.02mm |
| Print Temp | 200—240℃ |
| Bed Temp | 100-120℃ |
| Bed Setting | Masking tap or temperature resistant heat tape |
| Applicable Models | FDM—3D Printer |
Spool Size:
Quality control:
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest certificate.
2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
5million-10million
Employee Number:
51~100
Ecer Certification：
Verified Supplier
Dongguan Dezhijian Plastic Electronic Ltd Our Factory at Waterfront industrial Zon... Dongguan Dezhijian Plastic Electronic Ltd Our Factory at Waterfront industrial Zon...
Get in touch with us
Leave a Message, we will call you back quickly!