Large Field 10600nm 100W CO2 Laser Marking Machine On Wood

Product Specification

100W CO2 Laser Marking Machine For Large Field

Equipment Introduction

• MRJ-CO2-3D100A is a type of CO2 laser marking machine, which can both do laser marking and laser engraving on non-metallic materials;

• It is designed to realize large scan field laser marking and small focal beam spot;
This equipment is suitable for large scan field laser engraving and cutting for leather, cloth, paper, rubber, PVC, wood, glass, plastic etc.

Product Parameters

System Characteristics
1. Three-axis dynamic system, larger marking field and more fine beam spot diameter;
2. Integrates data collection, electronic control, mechanical servo, optical scanning and other functions;
3. Imports glass CO2 laser, high power, fine beam spot quality, stable performance;
4. Totally enclosed and maintenance-free laser optical system, no need adjustment, "install and play" implemented;
5. Adopts the optimal designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability;
6. Smaller focus beam spot and high energy density, suitable for laser engraving and cutting on large field materials.

Applications

♦ Clothing, leather, craft gifts, packaging, advertising, wood, textile, plastic, signs, electronic communications, clocks, glasses, printing, decoration and other non-metal processing industry can be marked. Marking process on wood products, cloth, leather, plexiglass, epoxy resin, acrylic, unsaturated resin and other non-metallic materials have good results.

♦ The application in the food industry mainly refers to the use of laser on the surface of food to produce a variety of information marks, such as: patterns, two-dimensional code, etc. The advantages are no consumables, printing effect is more precise and clear, higher resolution, low failure rate, clean and pollution-free.

Differences between laser marking machine & laser engraving machine

Laser marking machine refers to the use of laser beam in a variety of different material on the surface of the permanent mark equipment. Laser engraving machine refers to the use of laser to engraving materials to engraving an advanced equipment. The common characteristics of laser marking machine laser engraving machine are the use of laser processing, they all belong to advertising equipment. Laser marking machine can not only be used for advertising industry, but also for a variety of packaging industry. Laser engraving machine can not only be used for advertising industry, but also for various decoration, automotive industry, etc.

1. Different working field

The working field of laser marking machine is not particularly large, and it is as big as an ordinary office desk.

Low power laser engraving machine processing field is not big either, but high power laser engraving machine is mainly used to cut metal, the processing field is very large, at least as big as a bed.

2. Different speed

The speed of the laser marking machine is much faster than the laser engraving machine, because it does not need to mark to deep to leave the mark.

3. Different depth

Laser engraving machine can engrave in large field size, it also can cut, the depth is much more than laser marking machine.

4. Different lasers

The optical path system of laser engraving machine is composed of three reflective mirrors and a focusing mirror, the laser is generally carbon dioxide glass tube. The life of glass tube laser is generally within 2000-10000 hours. Laser marking machine laser is generally a metal tube laser (non-metal marking machine) and YAG solid laser (metal laser marking machine), the life is generally more than five years. The metal tube of the laser marking machine can be inflated again.

5. Different prices

Due to different materials and models, the prices of laser marking machines are not the same, ranging from tens of thousands to hundreds of thousands. The price of low power laser engraving machine or laser marking machine for non-metals is relatively much cheaper. But laser engraving machines that cut thick metal are also expensive.

MRJ-CO2-3D100A can both do laser marking and laser engraving on non-metallic materials.