Full Automatic PE Film Fabric Packing Machine 3 - 4 Volumes/Min Packaging

Product Specification

RH-S600 Full-automatic PE Film Cloth Packing Machine

Application:

The machine adopts the latest technology of Korea. It is suitable for packaging all kinds of fabrics, which can be adjusted automatically according to the size of the packaging. It uses the way of simultaneous packaging of both sides, which can save time and improve the efficiency as well. Without using hot air shrinkage, it can also undertake strong packing, further reducing the power consumption; the general film can be used for packaging, reducing the packaging cost.

Specific structure and configuration

1. The entry conveyor belt

Overall dimension is L5000MM * D500MM * H700MM, and gear motor form Taiwan ChengGang Motor is adopted, with automatic induction start-stop, automatic standby in the case of no packaging, to save electricity

2. The host

A. Automatic detection department of fabric diameter and length

Korean ISTC brand is adopted for the cylinder, and Korean AUTONICS brand for sensor, which are stable and durable.

B. Film supply department

Sensor induction supply film is used, which can automatically adjust the film supply according to the fabric size detected in the previous department. Rubber coating processing is adopted for rubber roller, which is not easy to skid and durable.

C. Body conveyor department

4T PVC belt structure is used to keep the fabric always fixed stopping in middle position of the equipment.

D. Pushing-off device

Double-department cylinder pushing-off device is used to move the fabric to the center sealing position.

E. Middle conveyor belt device

Korean imported cover coping connection constitutes four groups of parallel transmission platform, which position can be adjusted up and down, to keep the seam of fabric always in the center.

F. Middle sealing department

Korean imported high temperature resistant Teflon coating tool post is adopted for the tool post, and the seam is film which won't be adhesive on the knife edge, to make the seam more neat and beautiful.

G. Center vertical platform department

The sealing on both sides can be automatically adjusted up and down, to keep the incision on both sides always in the central position of the fabric end face

H. Both sides sealing department

For the sealing operation on both sides of fabric, Korean imported Teflon tool post is used, and the cutting-off pre-drawn device with exclusive use makes the fabric after packaging more compact

I. Hot air heating department

Korean imported ceramic heater and fan loop structure are used for time adjustable heat treatment with blowing of the incision on both sides

J. Hot air flap finishing department

The fabric after hot air heating will be moved to this position for flap finishing on both sides, and the incision after finishing is neat and beautiful

K. Lift machine taking out department

Packed fabrics will be removed from the packing machine

Technical Parameters:

Packing size: width: 1100 MM - 2100 MM, diameter: Ø 100 MM - Ø 550 MM, weight: 5 KG - 800 KG

Packaging capacity: 3-4 volumes/min

Packing materials: L.D.P.E FILM thickness: 0.03 MM - 0.10 MM

Conditions of use: voltage: AC380V, 3 phase 50 HZ, pressure: 5-8KGF

Main parts and place of origin

1. Cylinder: Korea ISTC brand

2. Electrical components: Korea LC LS and Korea AUTONICS

3. Motor: Taiwan ChengGang Motor

4. The main cutting knife and cutting knives of both sides: high strength aluminum alloy tool post, Korean imported with original packaging

5. Frame and machined parts: domestic processing

6. Equipment surface treatment: high temperature coating, chrome plating, zinc plating, black finish, etc.