High Precision 4.4Kg MMS LiDAR Mobile Mapping System PM-1500 1500m Long Range

Product Specification

5mm@50m high precision 4.4 kg LiDAR mobile mapping system PM-1500 with 1500m long range and 2million points/s frequency

PM-1500 LiDAR mobile mapping system is a high-precision, high frequency and long-range mobile laser measurement system independently developed by Wuhan Hi-Cloud Technology Co., Ltd. It integrates high-precision inertial navigation module and aerial survey camera. The core component of the system is the laser scanner with multi-echo technology function. It can synchronously obtain 3D laser point cloud and POS data, quickly generate DSM, DEM and DOM and produce DLG and 3D models through a complete set of data processing and application software.

PM-1500 system can be applied to multi rotor UAV, VTOL fixed wing UAV, small aircraft and helicopter to obtain dense high-precision laser point cloud data on the ground on a fast flying mobile platform.Combined with professional post-processing software, an integrated solution will be offered. It is widely used in new basic surveying and mapping, digital 3D modeling, topographic surveying and mapping, cadastral survey, traffic survey, power line inspection, forestry survey, disaster monitoring and other fields.

Main features of PM-1500 LiDAR mobile mapping system

• Long measurement range: maximun range 1500m@60% reflectivity
• High frequency: up to 2 million points/s
• High precision: range accuracy 5mm@50m; system accuracy better than 5cm
• Multi echo: 4 times echo
• Lightweight: 4.4kg
• Intregration: highly integrates sensors such as laser scanner, GPS, IMU and aerial survey camera, etc.
• Cost-effective: stable performance, cost-effective

Main parameters of PM-1500 LiDAR mobile mapping system

1. Laser scanner

2. Camera system

3. POS system

4. System performance

Application projects of PM-1500 LiDAR mobile mapping system

1. Topographic survey project

The survey area is mainly flat terrain with small undulations and a maximum height difference of 20 meters. There is a main road in the survey area, with more vegetation and several densely populated areas.

Accuracy requirement: The point density requirement is better than 16pt/m²; Horizontal/vertical accuracy requirements: ≤5cm, meet 1:500 topographic surveying and mapping requirement

2. Inspection of 500kV DC transmission line project

The inspected line of the project is 500kV DC transmission line segment, including 3 base towers and 2 intervals, with a total length of about 0.8km.

Requirements: Danger point status analysis/Danger point predictive analysis/Component status quantitative analysis

3. 3D city model project

The total area of the survey area is about 10 square kilometers. It is necessary to obtain the original laser point cloud and oblique image in the survey area, and generate the 3D model according to the obtained original data.

The laser point cloud obtained by airborne LiDAR aerial survey technology and the digital image data taken by oblique camera are used to generate Digital Elevation Model (DEM) and Digital Orthophoto Map (DOM) and produce terrain model. At the same time, the 3D model is generated based on laser point cloud data and line drawing. Obtain the building height through the 3D model, obtain the building information through the oblique image and ground photos, and then build the building information database.