Supply Ability | 500 tons |
Delivery Time | 15 work days |
Packaging Details | Seaworthy Packing |
Application | Elevator Car, Subway Car, All Kinds of Cabin, Arch |
Processing Service | Punching, Cutting, Bending, Decoiling |
Edge | Mill Edge or Slit Edge |
Protection | PVC, PE Film White or Blue, Laser Film |
Size | Customized |
The Tolerance | +_1% |
Trademark | BAOSTEEL |
Material | 2205 904L Stainless Steel |
Brand Name | BAOSTEEL |
Model Number | 440C |
Place of Origin | China |
Certification | ASTM,AISI,JIS,SUS,DIN,EN |
View Detail Information
Explore similar products
AISI 304 SS304 1.4301 SUS304 10*1500*6000mm Stainless Steel Plate 1D Surface
SUS304 ASTM A240 AISI 304 S30408 Stainless Steel Plate For Corrosion Resistance
304 SS316 Price Per Kg S30408 20mmThick 2000*6000mm Stainless Steel Plate
ASTM A240 AISI 321 SUS321 Stainless Steel Plate S32168 For Boiler Pressure
Product Specification
Supply Ability | 500 tons | Delivery Time | 15 work days |
Packaging Details | Seaworthy Packing | Application | Elevator Car, Subway Car, All Kinds of Cabin, Arch |
Processing Service | Punching, Cutting, Bending, Decoiling | Edge | Mill Edge or Slit Edge |
Protection | PVC, PE Film White or Blue, Laser Film | Size | Customized |
The Tolerance | +_1% | Trademark | BAOSTEEL |
Material | 2205 904L Stainless Steel | Brand Name | BAOSTEEL |
Model Number | 440C | Place of Origin | China |
Certification | ASTM,AISI,JIS,SUS,DIN,EN | ||
High Light | 904L 2205 Stainless Steel Sheet ,2205 Stainless Steel Sheet 0.3mm ,1000mm 904l stainless steel sheet |
Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness, and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which make 440C particularly suited to such applications as ball bearings and valve parts.
Corrosion Resistance:
*Good resistance to the atmosphere, freshwater, foods, alkalies, and mild acids. Best resistance in the hardened and tempered and passivated condition. A smooth polished surface also assists.
*The corrosion resistance of grade 440C approximates that of grade 304 in many environments.
Heat Resistance:
*Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties by over-tempering.
Heat Treatment:
*Annealing - Full anneal - 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing - 735-785°C and slow furnace cool.
H*ardening - Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table.
*Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering
in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance.
Welding:
*If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility.
Machining:
*In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel. Chips are tough and stringy so chip breakers are important. If these grades are hardened machining becomes more difficult and probably impossible.
440C Stainless Steel Chemical Composition:
Weight % (all values are maximum unless a range is otherwise indicated)
Element | Content (%) |
Iron, Fe | 79.15 |
Chromium, Cr | 17 |
Carbon, C | 1.1 |
Manganese, Mn | 1 |
Silicon, Si | 1 |
Molybdenum, Mo | 0.75 |
440C Stainless Steel Mechanical Properties:
Properties | Metric | Imperial |
Tensile strength | 760-1970 MPa | 110000-286000 psi |
Yield strength (@ strain 0.200%) | 450-1900 MPa | 65300-276000 psi |
Bulk modulus | 166 GPa | 24100 ksi |
Shear modulus | 83.9 GPa | 12200 ksi |
Elastic modulus | 200 GPa | 29008 ksi |
Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break | 2-14 % | 2-14 % |
Hardness, Rockwell B (converted from Brinell hardness) | 97 | 97 |
440C Stainless Steel Applications:
FAQ:
Q: Are you manufacturer?
A: Yes , we are manufacturer. We have our own factory.
Q: Can we visit your factory ?
A: Welcome to visit. Let us know your schedule in advance, then we can pick you up.
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
500,000,000-800,000,000
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Company Overview : The company has an indoor warehouse of 5000 square meters and an open warehouse of 4000 square meters, which can fully meet the temporary turnover and phased storage of customers' steel pipe reservation. The subordinate processing plant has 6 sets of medium frequency h... Company Overview : The company has an indoor warehouse of 5000 square meters and an open warehouse of 4000 square meters, which can fully meet the temporary turnover and phased storage of customers' steel pipe reservation. The subordinate processing plant has 6 sets of medium frequency h...
Get in touch with us
Leave a Message, we will call you back quickly!